FITNESS NETWORKING

One type RJ45 networking port (A) allows the Life Fitness Summit Trainer to be connected to a network, such as FitLinxxTM interactive fitness network.

Fitness network: The network connection enables the con- sole to upload user workout statistics to a fitness network database or to download remotely stored information, such a pre-set workout program. See Section 4.2, titled Using the Workouts, for information on logging onto a network.

This port is located on the back of the console and is enclosed by a removable cover. Any use of the port for other than its intended purpose could void the product warranty.

CABLE TV HOOK-UP

Note to the CATV Installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

Antenna Grounding According to the NEC

Antenna Grounding According to the National

Electrical Code, ANSI/NFPA 70.

1. Antenna lead in wire

2. Antenna discharge unit (nec section 810-20)

3. Grounding conductors (nec section 810-21)

4. Ground clamp

5. Power service grounding electrode system (nec article 250, part h)

6.Ground clamp

7.Electric service equipment

NOTE: The TV aspect of the LCD Console can only receive a analog signal. Digital cable must be externally converted to an analog signal. A 75-ohm external antenna terminal for VHF/UHF (>43dBuV (@75ohm) or > 65.8dBm) TV signal input must be present before TV setup can occur.

Life Fitness is not responsible for the installation of CATV service or components required for the delivery of CATV service.

9

Page 10
Image 10
Life Fitness 95Le operation manual Fitness Networking, Cable TV HOOK-UP