TroUblesHooTInG THe TreaDMIll (Continued)
Malfunction | Probable Cause | Corrective action | |
|
|
| |
|
| Check levelers and level treadmill. | |
Striding belt slips | Floor surface is uneven. | Check striding belt & | |
necessary. Refer to How to Adjust and | |||
|
| ||
|
| Tension the Striding Belt. | |
|
|
| |
| User is pushing striding belt. This oc- |
| |
| curs when the runner is running faster |
| |
| than the striding belt will travel, with |
| |
| the result of the striding belt being |
| |
| pushed with the runner’s feet. | Instruct users not to push striding belt | |
|
| ||
|
| in either direction. | |
| User is stalling striding belt.This will | ||
|
| ||
| occur with heavier users at lower strid- |
| |
| ing belt speeds. The striding belt will |
| |
Maximum speed is reduced. | “stall” if the user is traveling slower |
| |
than the striding belt speed. |
| ||
|
| ||
|
|
| |
| Striding belt/deck malfunctions. The |
| |
| deck laminate is worn through or the | Replace belt and deck. | |
| underside of striding belt is glazed | ||
|
| ||
| over (hard, glossy). |
| |
|
|
| |
| Power source is insufficient. | Plug treadmill into a 15 amp. circuit. | |
|
|
| |
|
| Inspect underneath striding belt and | |
Rubbing sound comes from | Foreign objects may be stuck under- | machine. Remove any debris or | |
underneath machine. | neath the machine. | objects that may cause interference | |
|
| with the treadmill. | |
|
|
| |
Display does not illuminate when | Loose 10 pin connection at display | Check all electrical connections for | |
proper attachment. Contact Life | |||
machine is powered on. | console or DSP motor control board. | ||
Fitness Customer Support Services. | |||
|
| ||
|
|
|
40
