Life Fitness T9i Entering and Using the User Menu, User Menu Items, User Statistics

5 USER MENU

5.1ENTERING AND USING THE USER MENU

Enter the USER MENU by using one of two procedures:

Press the CLEAR key twice, and then hold down the ENTER key. The unit goes through a "warm" reset and beeps three times, indicating that the USER MENU has been activated.

OR, hold down the ENTER key, and turn the treadmill on. The message "USER MENU" will appear. After about one second, the MESSAGE CENTER displays the first menu item.

Use the ENTER key to scroll forward through the menu items. Use the CLEAR key to scroll backwards. There are two ways to exit the menu: Press the CLEAR key continuously to return to the beginning of the menu; OR switch off the treadmill. Doing so causes all settings to be saved.

5.2USER MENU ITEMS

USER STATISTICS

The User Statistics mode is used to display the current, accumulated statistics of the workouts stored under the My Workouts personal programs feature.

To access statistics for a specific stored workout, press the MY WORKOUTS key repeatedly until the name of that stored workout appears in the MESSAGE CENTER. Then, press ENTER. When the desired name appears, press ENTER.

Use the TIME ARROW keys to scroll backward and forward through the statistics. If the value for any sta- tistical item is greater than the listed maximum, the MESSAGE CENTER displays dashes, "----".

To clear statistics to zero: Press the SPEED UP ARROW key. The MESSAGE CENTER displays, "PRESS SPEED DOWN ARROW KEY TO CLEAR STATS". Press the SPEED DOWN ARROW key. The statistics are cleared, and the MESSAGE CENTER displays, "STATS CLEAR". If any other key is pressed after the SPEED UP ARROW is pressed, the console cancels the clearing of the statistics. To re-activate the clear- ing process, press the SPEED UP ARROW key again.

MY CONFIGURATION

The values for the settings can be adjusted and saved. Cycle through the settings using the TIME ARROW keys. Use the INCLINE or SPEED ARROW keys to change the settings. Any adjustments are saved auto- matically. Revert a setting back to its factory default value by pressing the COOL DOWN key

SOFTWARE VERSION NUMBERS

Use any of the UP and DOWN ARROW keys to toggle between displays of the current software version for the console, and for the Motor Controller. The MESSAGE CENTER displays the Console Software Version number as "CONSOLE VER=XX.X', where xx.x is the version number. For the Motor Controller, the MES- SAGE CENTER displays "MOTOR VER = XX.X".

36