5.3USER MENU SETTINGS
SETTING | DEFAULT | RANGE | DESCRIPTION |
| VALUE |
|
|
USER STATISTICS |
|
| Mode displays accumulated statistics of up to seven |
|
|
| different users. |
Select User |
|
| Use SELECT ARROW keys to select 1 of 7 users. † |
MY WORKOUTS | My Workouts X |
| Press ENTER to access accumulated statistics of the |
|
|
| selected user. |
Statistics |
|
|
|
MILES |
| XXXX.XX | Total accumulated distance - displayed in miles, and |
|
|
| percentage of miles. |
CALS |
| XXXXXXX | Total accumulated workout calories. |
TIME |
| XXXX:XX | Total accumulated workout time - displayed in |
|
|
| hours: minutes. |
MY CONFIGURATION |
|
| Mode allows 13 settings to be adjusted and saved |
ENGLISH/METRIC UNITS | ENGLISH |
| The measurement unit type for weight, distance, and |
|
|
| speed. |
CUSTOM WORKOUT ENTRY | N/A |
| See Programming Custom Workouts in this Section. |
MAXIMUM SPEED | 12.0 (MPH) |
| This is the fastest speed at which the treadmill can operate. |
PAUSE TIMEOUT | 5 (minute) |
| This is the maximum time during which a workout can |
|
|
| remain in pause mode. |
WATTS DISPLAY | OFF (Int'l: ON) |
| If this option is enabled, the MESSAGE CENTER displays |
|
|
| the Watts equivalent of the step rate. |
METS DISPLAY | OFF |
| If this option is enabled, the MESSAGE CENTER displays |
|
|
| the METs equivalent of the step rate. |
PACE DISPLAY | ON |
| This feature displays the rate of minutes per mile. |
CALORIE PER HOUR DISPLAY | ON (Int'l: OFF) |
| If this option is enabled, the MESSAGE CENTER displays |
|
|
| the number of calories burned per hour during the workout. |
DISTANCE CLIMBED DISPLAY | OFF |
| The total distance climbed, based on the incline and speed |
|
|
| of the treadmill. |
ERASE CUSTOM WORKOUTS | N/A |
| This option erases all custom workouts in a single step. |
MAXIMUM INCLINE | 15.0 |
| This option changes the maximum incline grade to a value |
|
|
| lower than 15 percent. |
START MESSAGE SETUP | N/A |
| See “Using the START MESSAGE Setup” in this section. |
SYSTEM BEEPS | ON |
| Enable/Disable System Beeps outside of diagnostics |
|
|
| (system beeps within diagnostics cannot be disabled) |
SOFTWARE VERSION NUMBERS |
|
| Mode shows software version for console and motor |
|
|
| controller. |
CONSOLE VER: |
| XX.X | Displays software version for the console board. |
MOTOR VER: |
| XX.X | Displays software version for the motor controller board. |
39
