1.4 SETUP CONTINUED
STEP 6
Attach the display console to the console plate:
1.Line up the four holes in the back of the console plate (H) with the four holes in the back of the display console (L).
2.Attach the display console (L) using the four (#2) screws. Be careful not to pinch cables between the console and the console plate. Be sure to get each screw started before fully tightening.
NOTE: To avoid stripping, do not over tighten screws.
STEP 7
Connect the pedal levers to the upper arms:
1.Insert pedal lever (M) into the clevis bracket (N) of the upper arm (O).
2.Connect the pedal lever (M) to the upper arm (O) using one (#6) 3 1/4” bolt and one (#8) high profile nylock nut. Using a 9/16” socket wrench, and a 9/16" open ended wrench, tighten securely.
3.Repeat procedure for the opposite side.
9
