5. Warranty, Safety | & Specifications |
| |
|
|
4. Troubleshooting | |
|
|
|
|
3. Optional | Accessories |
| |
| |
2. Setup & Use | |
| |
|
|
1. Overview | |
|
|
3.INSTALLATION OF AMPLIFIER WALL- MOUNT BRACKET
The CAT 860 systems include a bracket for optional
A.Determine the location:
a.It should be located near a power outlet.
b.Height should allow for access to front control panel, but also be in compliance with building and ADA regulations.
B.Screw the bracket to the wall at the two screw hole points with the included hardware. Attach to a stud when possible; use the drywall mollies when studs are not available.
C.Slide the CAT 860 onto the bracket
using the channel on the bottom of the amplifier.
D. Secure the CAT 860 to the bracket by tightening the screw on the bottom.
E. Now that the CAT 860 is secure, it can be slowly pulled out and pivoted for better access to the back panel. Push the CAT 860 back in, to lock into place.
F. The power supply can be set on the back of the bracket and secured with ties if desired.
4. SPEAKER INSTALLATION
1.Locate the speaker installation instructions packed with your speaker(s).
2.Follow instructions and mount speaker(s).
3.Return to this manual to complete the set up of your system.
5A. CONNECT THE POWER SUPPLY
1. | Ensure the power button is | 3. Connect the black AC power cable |
| depressed in the OFF position. | from the power supply to a wall |
2. | Connect the CD end of the power | outlet. |
|
supply to the black power jack labeled DC POWER.
CAT 860 Amplifier
DC Power Source Cable
5B. ISR CONNECTION
1.Ensure the power is still switched off.
2.Check the connection from the ISR to the CAT 860. Ensure the sensor cable is securely attached and locked into place.
ISR Sensor/Receiver
CAT 860 Amplifier
5. Warranty, Safety | & Specifications |
| |
|
|
4. Troubleshooting | |
|
|
|
|
3. Optional | Accessories |
| |
|
|
2. Setup & Use | |
| |
|
|
1. Overview | |
|
|
20 | 21 |
