FACTORY INSTALLED
OPTIONS/ACCESSORIES
There are no factory installed options/accessories on the CV-250.
FIELD INSTALLED OPTIONS
REMOTE VOLTAGE CONTROL (K857)
The K857 consists of a control box with 25 feet (7.6
m)of four conductor cable. Installation of a K857 Remote Voltage Control in the CV-250 requires a K864 Remote Control Adapter. Refer to the instruc- tions provided with the K857 for hookup to the CV- 250. When properly connected, and with the CV-250 Local-Remote Switch in the "Remote" position, the K857 functions the same as the CV-250 Voltage Adjust control, enabling minimum to maximum output voltage adjustment of the CV-250.
UNDERCARRIAGE (K835)
Includes front casters, a handle, a bracket, and a rear wheeled platform that is capable of carrying one gas cylinder. The CV-250 lifting eye is not functional with the K835 undercarriage installed.
TWO-CYLINDER UNDERCARRIAGE (K874)
Platform type undercarriage that can accommodate either one or two gas bottles, or one gas bottle and a Magnum water cooler. The CV-250 lifting eye is not functional when the K874 undercarriage is installed.
WIRE FEEDER SWIVEL MOUNT (K178-1)
Allows an LN-7 or LN-742 to be securely mounted on the roof of a CV-250.
UNIVERSAL ADAPTER (K867)
Provides a means of connecting auxiliary equipment to the wire feeder receptacle on the CV-250 power source. Consists of a 14-pin MS-type (Amphenol) plug with 8 inch (0.2 meter) long flex leads, one for each circuit present in the wire feeder receptacle. Not required when using a standard wire feeder input cable, such as a K480, with a Lincoln wire feeder.
COMPATIBLE LINCOLN EQUIPMENT
The CV-250 is intended for use with the LN-7, LN-742, and LN-25 wire feed units. Use the Cables / Kits listed below to make connection easily:
LN-7 / LN-7GMA | Requires K480 Input Cable |
| | |
LN-25 | Requires K484 | Jumper Plug Kit |
| | |
LN-25 w/K444-1 | Requires K864 | Remote Control |
Remote Voltage | Adapter and K484 Jumper Plug |
Control Kit | Kit | |
| | |
LN-742 / LN-742H | Requires K591 | Input Cable |
| | |
