Lincoln Electric CV-300 manual Remote Output, Local Output

B-4	OPERATION	B-4
J. WIRE FEEDER VOLTMETER SWITCH	-When welding electrode negative (most
	Innershield	electrodes) set the switch to "-".

-This switch selects the polarity of the wire feeder voltmeter, if so equipped. When weld- ing electrode positive (MIG, Outershield and some Innershield processes) set the switch to "+".

-This switch has no effect on the welding polarity. In fact, if the wire feeder being used does not have a voltmeter, the setting of this switch has no effect.

GRAPHIC SYMBOLS THAT APPEAR ON

THIS MACHINE OR IN THIS MANUAL

THERMAL PROTEC-

OFFTION INDICATOR LIGHT

ON	CIRCUIT
	BREAKER
AC	CLOCKWISE ROTA-
	TION INCREASES
POWER
	VOLTAGE
REMOTE OUTPUT	LOCAL OUTPUT
VOLTAGE CONTROL	VOLTAGE CONTROL

WARNING

INDICATES WARNING INFORMATION

LOCATED ON RIGHT CASE SIDE

CV-300