Lincoln Electric CV-305 manual Connection of NON-LINCOLN Wire, Feeders

CV-305

DIAGRAM FOR WIRE FEEDERS THAT CLOSE A

SET OF CONTACTS TO GET POWER SOURCE OUTPUT:

LINCOLN POWER SOURCE 14-PIN WIRE FEEDER RECEPTACLE WITH K867 UNIVERSAL ADAPTER

		N.A.
OUTPUT		115 V.A.C.	42 V.A.C.	N.B.	N.A.
CONTACTOR
CONTROL		SUPPLY	SUPPLY		}
}		}	}
4	2	31 32	41 42	GND 75 76 77

	}	MIN.		MAX.
}		GND
	WIRE FEEDER			10 K OHM
	INPUT POWER			}
CONTACTS CLOSE
TO GET POWER			REMOTE OUTPUT
SOURCE OUTPUT	N.D.			CONTROL
NON-LINCOLN WIRE FEEDER			(IF SO EQUIPPED)

DIAGRAM FOR WIRE FEEDERS THAT SUPPLY A VOLTAGE TO GET POWER SOURCE OUTPUT:

LINCOLN POWER SOURCE 14-PIN WIRE FEEDER RECEPTACLE WITH K867 UNIVERSAL ADAPTER

N.A.

OUTPUT		115 V.A.C.	42 V.A.C.	N.B.	N.A.
CONTACTOR
CONTROL		SUPPLY	SUPPLY		}
}		}	}
4	2	31 32	41 42	GND 75 76 77

RELAY	RELAY CONTACT
	(NORMALLY OPEN)
	RELAY COIL
	N.C.

}	}	MIN.		MAX.
		GND
VOLTAGE SUPPLIED	WIRE FEEDER			10 K OHM
TO GET POWER	INPUT POWER			}
SOURCE OUTPUT
			REMOTE OUTPUT
	N.D.			CONTROL
NON-LINCOLN WIRE FEEDER			(IF SO EQUIPPED)

CONNECTION OF NON-LINCOLN WIRE

F-10

DIAGRAMS

N.A. CONNECTIONS 31 AND 32 MAY NOT BE PRESENT ON ALL MACHINES.

N.B. POWER SOURCE MUST BE PROPERLY GROUNDED.

N.C. RELAY COIL MUST BE RATED FOR THE SAME VOLTAGE THAT IS SUPPLIED BY THE WIRE FEEDER.

N.D. IF THE WIRE FEEDER REQUIRES AN INPUT VOLTAGE OTHER THAN 42 V.A.C., OR 115 V.A.C. ON SOME MACHINES, AN EXTERNAL POWER SUPPLY FOR THAT VOLTAGE MUST BE PROVIDED.

FEEDERS

F-10