FACTORY INSTALLED
OPTIONS/ACCESSORIES
There are no factory installed options/accessories on the CV-305.
FIELD INSTALLED OPTIONS
REMOTE VOLTAGE CONTROL (K857)(1)
The K857 consists of a control box with 25 feet (7.6
m)of four conductor cable. Installation of a K857 Remote Voltage Control in the CV-305 requires a K864 Remote Control Adapter. Refer to the instruc- tions provided with the K857 for hookup to the CV- 305. When properly connected, and with the CV-305 Local-Remote Switch in the "Remote" position, the K857 functions the same as the CV-305 Voltage Adjust control, enabling minimum to maximum output voltage adjustment of the CV-305.
(1)Also availible is a K857-1 w/6 Pin MS-Type (Amphenol) Plug and 100 feet (30.4m) cable.
TWO-CYLINDER UNDERCARRIAGE (K874)
Platform type undercarriage that can accommodate either one or two gas bottles, or one gas bottle and a Magnum water cooler. The CV-305 lifting eye is not functional when the K874 undercarriage is installed.
UNIVERSAL ADAPTER (K867)
Provides a means of connecting auxiliary equipment to the wire feeder receptacle on the CV-305 power source. Consists of a 14-pin MS-type (Amphenol) plug with 8 inch (0.2 meter) long flex leads, one for each circuit present in the wire feeder receptacle. Not required when using a standard wire feeder input cable, such as a K480, with a Lincoln wire feeder.
TWIST-MATE CABLE PLUG (MALE)
• For 1/0-2/0 (50-70 mm2) Cable | (K852-70) |
• For 2/0-3/0 (70-95 mm2) Cable | (K852-95) |
TWIST-MATE CABLE RECEPTACLE (FEMALE)
• For 1/0-2/0 (50-70 mm2) Cable | (K1759-70) |
• For 2/0-3/0 (70-95 mm2) Cable | (K1759-95) |
COMPATIBLE LINCOLN EQUIPMENT
The CV-305 is intended for use with the LF-72, LN-7, LN-742, and LN-25 wire feed units. Use the Cables / Kits listed below to make connection easily:
LF-72 | Requires K1797-XX |
| Control Cable(Included with |
| Wire Feeder) |
| |
LN-7 / LN-7GMA | Requires K480 Input Cable |
| |
LN-25 | Requires K484 Jumper Plug Kit |
| |
LN-25 w/K444-1 | Requires K864 Remote Control |
Remote Voltage | Adapter and K484 Jumper Plug |
Control Kit | Kit |
| |
LN-742 / LN-742H | Requires K591 Input Cable |
| |
