Lincoln Electric CV-305 manual Power Source to AN LN-25 / K444-1

CV/CV-I POWER SOURCE TO LN-25 WITH K444-1 OPTION CONNECTION DIAGRAM

F-6

WARNING

ELECTRIC

SHOCK

CAN KILL

Turn off input power to the Welding Power Source using the disconnect switch at the fuse box Before connecting the wire feeder.

Only qualified persons should install, use or

service this machine.

CV

CV-305

CV/CV-I	14 PIN
POWER SOURCE	AMPHENOL
N.D.	OPTIONAL K864 REMOTE
	CONTROL ADAPTER

+	-
		N.C.		LN-25
				WIRE FEEDER
			OPTIONAL	WITH K444-1 OPTION
	TO WORK		K484 JUMPER
			PLUG

ELECTRODE CABLE

N.A. WELDING CABLE MUST BE SIZED FOR CURRENT AND DUTY CYCLE OF APPLICATION.

N.B. DIAGRAM SHOWS ELECTRODE POSITIVE. TO CHANGE POLARITY, TURN POWER "OFF", REVERSE ELECTRODE AND WORK CABLES AT POWER SOURCE, SWITCH LN-25 POLARITY SWITCH.

N.C. CONNECT THE K484 JUMPER PLUG TO THE 14 PIN RECEPTACLE OF THE K864 REMOTE CONTROL ADAPTER. CONNECT THE 6 PIN PLUG FROM THE LN-25 (WITH K444-1 OPTION) TO THE 6 PIN RECEPTACLE OF THE K864

REMOTE CONTROL ADAPTER. SWITCH THE POWER SOURCE "LOCAL/REMOTE" SWITCH TO REMOTE. N.D. THE POWER SOURCE TERMINALS ARE ALWAYS "HOT" WHEN THE K484 JUMPER

PLUG KIT IS INSTALLED.

6-18-93

CLEVELAND, OHIO U.S.A. S20663

POWER SOURCE TO AN LN-25 / K444-1

DIAGRAMS

F-6