Lincoln Electric ES 275I specifications See Installation Section of this

E-5		TROubLEShOOTING	E-5
	Observe all Safety Guidelines detailed throughout this manual
	PRObLEMS	POSSIbLE	RECOMMENDED
	(SYMPTOMS)	CAuSE	COuRSE OF ACTION
		OuTPuT PRObLEMS
No output - Main input fuses open,		1. Inspect input leads for possible
indicating excessive current draw.		shorts or grounds or mis-connec-
		tions.
		2. Install new fuses and reapply
		power. If fuses open again, con-
		sult a Authorized Field Service
		Facility.

		If all recommended possible areas of
		misadjustment have been checked
		and the problem persists, Contact
		your local Authorized Field Service
The machine operates normally	1. Check the input voltage and input Facility.
when connected for 200 - 230VAC	voltage reconnect procedures.
input. There is no output when the	See Installation Section of this
machine is connected to 380VAC or	manual.
higher.

CAuTION

If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, con- tact your local authorized field service facility for technical troubleshooting assistance before you proceed.

ES 275i