OPERATION | ||
|
|
|
Read and understand this entire section before operating your machine.
SAFETY PRECAuTIONS
WARNING
ELECTRIC ShOCK can kill.
•Do not touch electrically live parts such as output terminals or internal wiring.
•Insulate yourself from the work and ground.
•Always wear dry insulating gloves.
____________________________________
FuMES AND GASES can be dangerous.
• Keep your head out of fumes.
•Use ventilation or exhaust to remove fumes from breathing zone.
____________________________________
WELDING, CuTTING and GOuGING SPARKS
can cause fire or explosion
•Keep flammable material away.
•Do not weld, cut or gouge on contain- ers that have held combustibles.
____________________________________
ARC RAYS can burn.
•Wear eye, ear and body protection.
GENERAL DESCRIPTION
The ES 275i is a 275 amp arc welding power source that utilizes single or three phase input power, to pro- duce constant current output. The welding response of this Invertec has been optimized for stick (SMAW) and TIG (GTAW).
OPERATIONAL FEATuRES
The ES 275i provides continuous total range output current adjustment, selectable welding modes and local or remote output control. Welding characteristics can be controlled via an arc force control. Additionally, starting characteristics can be adjusted via a “hot start” control.
WELDING CAPAbILITY
The ES 275i is rated at 275 amps, 35% duty cycle (based on a 10 minute cycle). It is also rated at 200 amps, 100% duty cycle, and 250 amps, 60% duty cycle.
LIMITATIONS
The ES 275i is not recommended for pipe thawing.
____________________________________
Only qualified personnel should operate this equip- ment. Observe all safety information throughout this manual.
ES 275i
