OPERATION | ||
|
|
|
WIRE FEED SPEED UNITS
To change the wire feed speed units:
Rotate the WFS knob to the left to use “inches/minute” for the wire feed speed units.
US
O O A | V |
O O WFS
WFS CALIbRATION WITH DIGITAL METERS
To calibrate the wire feed speed, before entering the
Rotate the WFS knob to the right to use “meters/minute” for the wire feed speed units. 
Then rotate the WFS knob to the 12 o’clock position.
EU
r
o
O O A | V |
O O WFS
Set the display to the desired wire feed speed (example: 400 inches per minute)
Measure the actual wire feed speed (example: 405 inches per minute)
While in the
Press the
RUN-IN
When
Model |
|
| 50 in/min |
Actual WFS =Calibration Factor | Example 405 | =1.01 |
Set WFS | 400 |
|
Press the
When
To change the
Rotate the WFS knob to the left to turn
r 
u
n
OF
F
O O A | V |
O O WFS
Rotate the WFS knob to the right to turn
Then rotate the WFS knob to the 12 o’clock position.
r
u
n
On
O O A | V |
O O WFS
Press the
