Lincoln Electric IM10092 manual Accessories, Factory Installed Equipment

C-1 ACCESSORIES C-1

FACTORY INSTALLED EQUIPMENT

• K1500-2 Gun Receiver Bushing.

DRIVE ROLL KITS (See Parts Pages)

K1803-1	Work and Feeder Cables Package.			Includes: Twist-Mate to Lug
				2/0 cable 14' (1.2m) long with
				Ground Clamp, and Twist-
				Mate to Lug 2/0 Cable 9'
				(2.7m) long.
K1840-xx		Weld Power Cable, Twist-Mate to		Includes: Twist-Mate to Lug,
		Lug.		1/0 cable of length "xx".
				Includes: Lug to Lug, 3/0
			Cable of length "xx" for lengths
K1842-xx		Weld Power Cable, Lug to Lug.		up to 60' (18.3m). Lug to Lug,
				4/0 Cable of length "xx" for
				lengths greater than 60'
				(18.3m).
K484		Jumper Plug Kit.		Includes: 14 pin circular con-
				nector with jumper for leads 2-
				4. For use in power sources
				for turning the weld terminals
				"ON" at all times.
K2330-2		Timer Kit		Includes: Panel and harness
				for adjusting preflow, burnback
				and postflow times
K2596-2		Plastic Case		Includes: a complete engi-
				neered plastic case.

LN-25™ PIPE