iii

SAFETY

iii

 

 

 

WELDING SPARKS can cause fire or explosion.

6.a. Remove fire hazards from the welding area. If this is not possible, cover them to prevent the welding sparks from starting a fire. Remember that welding sparks and hot

materials from welding can easily go through small cracks and openings to adjacent areas. Avoid welding near hydraulic lines. Have a fire extinguisher readily available.

6.b. Where compressed gases are to be used at the job site, special precautions should be used to prevent hazardous situations. Refer to “Safety in Welding and Cutting” (ANSI Standard Z49.1) and the operating information for the equipment being used.

6.c. When not welding, make certain no part of the electrode circuit is touching the work or ground. Accidental contact can cause overheating and create a fire hazard.

6.d. Do not heat, cut or weld tanks, drums or containers until the proper steps have been taken to insure that such procedures will not cause flammable or toxic vapors from substances inside. They can cause an explosion even though they have been “cleaned”. For information, purchase “Recommended Safe Practices for the Preparation for Welding and Cutting of Containers and Piping That Have Held Hazardous Substances”, AWS F4.1 from the American Welding Society (see address above).

6.e. Vent hollow castings or containers before heating, cutting or welding. They may explode.

6.f. Sparks and spatter are thrown from the welding arc. Wear oil free protective garments such as leather gloves, heavy shirt, cuffless trousers, high shoes and a cap over your hair. Wear ear plugs when welding out of position or in confined places. Always wear safety glasses with side shields when in a welding area.

6.g. Connect the work cable to the work as close to the welding area as practical. Work cables connected to the building framework or other locations away from the welding area increase the possibility of the welding current passing through lifting chains, crane cables or other alternate circuits. This can create fire hazards or overheat lifting chains or cables until they fail.

6.h. Also see item 1.c.

CYLINDER may explode if damaged.

7.a. Use only compressed gas cylinders

containing the correct shielding gas for the process used and properly operating regulators designed for the gas and

pressure used. All hoses, fittings, etc. should be suitable for the application and maintained in good condition.

7.b. Always keep cylinders in an upright position securely chained to an undercarriage or fixed support.

7.c. Cylinders should be located:

Away from areas where they may be struck or subjected to physical damage.

A safe distance from arc welding or cutting operations and any other source of heat, sparks, or flame.

7.d. Never allow the electrode, electrode holder or any other electrically “hot” parts to touch a cylinder.

7.e. Keep your head and face away from the cylinder valve outlet when opening the cylinder valve.

7.f. Valve protection caps should always be in place and hand tight except when the cylinder is in use or connected for use.

7.g. Read and follow the instructions on compressed gas cylinders, associated equipment, and CGA publication P-l, “Precautions for Safe Handling of Compressed Gases in Cylinders,” available from the Compressed Gas Association 1235 Jefferson Davis Highway, Arlington, VA 22202.

FOR ELECTRICALLY powered equipment.

8.a. Turn off input power using the disconnect switch at the fuse box before working on the equipment.

8.b. Install equipment in accordance with the U.S. National Electrical Code, all local codes and the manufacturer’s recommendations.

8.c. Ground the equipment in accordance with the U.S. National Electrical Code and the manufacturer’s recommendations.

Mar ‘95

CV ADAPTER

Page 4
Image 4
Lincoln Electric IM309-D manual Cylinder may explode if damaged

IM309-D specifications

Lincoln Electric IM309-D is a cutting-edge multi-process welding machine designed to meet the demands of both professionals and hobbyists in various welding applications. This machine stands out in the marketplace due to its innovative features, robust build, and advanced technologies that enhance usability and performance.

One of the main features of the IM309-D is its multi-process capability. The machine can seamlessly switch between MIG, TIG, and Stick welding processes, making it versatile for different welding tasks. This flexibility is particularly valuable in environments where different welding techniques are required for distinct projects.

The IM309-D employs advanced digital controls that offer precise welding parameters and settings adjustment. This level of control enables users to achieve optimal quality in their welds, regardless of the material type or thickness. The intuitive interface makes it user-friendly, allowing even less experienced welders to navigate its features with ease.

In terms of power, the IM309-D is equipped with a robust duty cycle that ensures consistent performance during extended welding tasks. It supports a wide voltage input, allowing it to operate effectively in various industrial or construction site settings. The machine is designed to be energy-efficient, reducing operational costs without compromising performance.

One of the prominent technologies utilized in the IM309-D is its Auto-Set feature. This intelligent technology automatically calculates optimal settings based on the material type and thickness, saving time and minimizing guesswork for the welder. Additionally, it incorporates an advanced cooling system that prevents overheating, ensuring reliability during prolonged use.

Safety is another critical focus of the IM309-D design. The machine features multiple safety mechanisms, including overload protection and thermal shutdown features that protect both the equipment and the operator. The robust construction also ensures durability, making it suitable for rigorous work environments.

Overall, the Lincoln Electric IM309-D stands out for its exceptional combination of versatility, efficiency, and safety. With its advanced technology and user-friendly interface, it is a reliable choice for welders looking to enhance their productivity and achieve superior results in their welding projects. Whether used in a professional shop or a home workshop, the IM309-D delivers impressive performance and value.