C-8

ACCESSORIES

C-8

 

 

 

K1548-1 LINC NET RECEPTACLE KIT (INPUT AND OUTPUT)

LINC NET RECEPTACLE (OUTPUT)

Optional Output Connector Installation into the Control Box Cabinet and/or into the Feeder Head Enclosure.

Control Box Cabinet Procedure

1.Turn off power.

2.Remove the screws from the front of the lower and middle option panels of the User

Interface cabinet.

3.Tilt the option panels away from the front opening of the Control Box cabinet. If the option panel has an electrical connector, disconnect it from the main printed circuit board (note connection point for re-connection later). Remove the option panel and set aside.

4.Remove the plastic plug (black) from the left hole in the bottom of the Control Box cabinet and store it in the bottom of the Control Box cabinet for future use, should the Optional Output Connector be removed.

5.Place the Optional Output Connector (Amphenol) through the hole opened by the previous step (place from the inside, out). Rotate the Optional Output Connector so itʼs aligning key is positioned to the front of the Control Box cabinet. Fasten the Optional Output Connector to the bottom wall of the Control Box cabinet with the four screws pro- vided.

6.Secure the choke (large circular component of the Optional Output Connector) by inserting itʼs leads into the white nylon clip located near the Optional Output Connector on the back wall of the Control Box cabinet. Insert the choke leads only.

7.The Optional Output Connector has two internal connectors, a four pin, and a single lead connec- tor. Connect the four pin connector to the unused four pin connector on the main printed circuit board. Connect the single lead connector to a similar connector found on a lead nearby that branches out of the Control Box wiring harness.

8.Re-install the lower and middle option panels by reversing the removal process. While re-installing the option panels, ensure clearance between Optional Output Connector components, Control Box wiring

harness, and option panel harness (if any).

Feeder Head Enclosure Procedure

1.Turn power off.

2.Remove the Feeder Head rear access door. The Feeder Head cover can be removed to aid instal- lation, but is not required.

3.Remove the plastic plug (black) from the hole at the right rear of the Feeder Head and store it in the left side of the Feeder Head rear compart- ment for future use, should the Optional Output Connector be removed.

4.Disconnect a printed circuit board connector located at the bottom right corner of the printed circuit board and position it to the left so as to pro- vide clear access to the lower right corner of the Feeder Head enclosure.

5.Place the Optional Output Connector (Amphenol) through the hole opened by the two previous steps (place from the inside, out). Rotate the Optional Output Connector so itʼs aligning key is positioned to the top of the Feeder Head enclo- sure. Fasten the Optional Output Connector to the back wall of the Control Box cabinet with the four screws provided.

6.Secure the choke (large circular component of the Optional Output Connector) by inserting itʼs leads into the white nylon clip located near the Optional Output Connector on the floor of the Feeder Head. Insert the long choke leads rather than the short leads that run between the choke and the Output Connector. Insert the choke leads only.

7.The Optional Output Connector has two internal connectors, a four pin, and a single lead connec- tor. Connect the four pin connector to the unused four pin connector on the printed circuit board. Connect the single lead connector to a similar connector found on a lead nearby that branches out of the Feeder Head wiring harness.

8.Reconnect the printed circuit board connector that was disconnected earlier.

9.Replace the rear access door and Feeder Head cover if removed.

POWER FEED 10 DUAL

Page 40 Page 42
Page 41
Image 41
Lincoln Electric IM658-A manual K1548-1 Linc NET Receptacle KIT Input and Output, Feeder Head Enclosure Procedure
Page 40 Page 42

IM658-A specifications

The Lincoln Electric IM658-A is a highly specialized and versatile industrial welding machine designed to meet the demanding needs of modern fabrication industries. This robust machine stands out for its advanced features and innovative technologies, making it a preferred choice among professionals in various sectors, including manufacturing, automotive, and construction.

One of the notable features of the IM658-A is its extensive range of welding capabilities. It supports several welding processes such as MIG, TIG, and Stick welding. This multifunctionality allows users to tackle a diverse array of projects without the need for multiple machines, simplifying workflow and optimizing efficiency. The machine is engineered to handle various materials, including steel, stainless steel, and aluminum, providing versatility that is crucial for intricate fabrication tasks.

In terms of technology, the Lincoln Electric IM658-A incorporates advanced inverter technology which enhances its performance while minimizing energy consumption. This technology not only reduces the overall weight of the unit but also improves its power efficiency, making it an environmentally friendly choice. The inverter design also contributes to a more stable arc, providing better control and precision during welding processes.

Another significant characteristic of the IM658-A is its user-friendly interface, which boasts an intuitive control panel. This feature is particularly beneficial for operators of varying skill levels, allowing for quick adjustments to settings and ensuring optimal performance for different welding tasks. The digital display aids in easy monitoring of parameters, resulting in consistent weld quality.

Durability is a hallmark of the Lincoln Electric brand, and the IM658-A is no exception. Constructed with high-quality materials, the machine is built to withstand the rigors of industrial environments. Its robust design includes protective features that safeguard internal components from damage, ensuring longevity and reliability.

Moreover, the machine is designed with portability in mind, as it is relatively lightweight and includes ergonomic handles, facilitating easy transportation around job sites. This makes it an ideal choice for mobile welding applications where versatility and ease of movement are crucial.

In summary, the Lincoln Electric IM658-A combines advanced features with innovative technologies to deliver a welding solution that meets the rigorous demands of various industries. Its multifunctional capabilities, energy-efficient design, user-friendly interface, and durable build make it a standout option for professionals looking to enhance their welding operations.
Top Page Image Contents