Lincoln Electric IM767 Optional Accessories, K586-1 Deluxe Adjustable Gas Regulator Hose Kit

C-1 ACCESSORIES C-1

OPTIONAL ACCESSORIES

1.K520 Utility Cart — Designed to transport the Lincoln family of small welders. Has provisions for mounting a single gas cylinder. Has front casters and large rear wheels. Handle height is easily adjustable. Bottom tray provided for tools and accessories. Easy assembly required; takes less than 15 minutes.

2. K586-1 Deluxe Adjustable Gas Regulator &

Hose Kit

Accommodates CO2 or mixed Gas Cylinders.

3.K663-2 Aluminum Welding Kit — This kit required for welding with .035 Aluminum wire. Included with this kit are a drive roll, liner and con- tact tip. It is important when changing between welding with steel wire and aluminum to exchange these components due to the lubri- cant applied to steel wire. Failure to do so may result in contaminated welds when welding alu- minum.

See Maintenance section for instructions on installing drive roll, cable liner, contact tip and their proper configuration.

4.KP666-035C Knurled Drive Roll (optional) — Reversible Drive Roll with double knurled grooves for .035 (0.9 mm) cored electrode.

5.K695-2 Spot / Stitch Timer Kit — Includes spot timer to control the spot welding arc time, and a stitch timer to control the on/off cycle time of the arc to prevent burn through on thin gauge metals. Also includes spot welding nozzle.

The Spot/Stitch Timer Kit installs inside the wire feed compartment, replacing the blank panel locat- ed below the gun trigger lead connectors, per the installation instructions included with the kit.

6.K549-1 .035 (0.9 mm) Innershield Welding Kit Includes a contact tip, a gasless nozzle and a cable liner to permit the Magnum™ 100L gun and cable to use .035” (0.9 mm) diameter flux-cored elec- trode. Also included is a spool of .035 (0.9 mm) Innershield NR-211-MP.

WELDMARK 135 PLUS