Lincoln Electric IM795 manual Safety Precautions, Identify and Locate Components

A-2 INSTALLATION A-2

Read entire installation section before starting installation.

SAFETY PRECAUTIONS

WARNING

ELECTRIC SHOCK can kill.

•Only qualified personnel should perform this installation.

•Only personnel that have read and under- stood the SP 170-I Operating Manual should install and operate this equipment.

•Machine must be plugged into a receptacle which is grounded per any national, local or other applicable electrical codes.

•The SP 170-I power switch is to be in the OFF (“O”) position when installing work cable and gun and when connecting power cord to input power.

IDENTIFY AND LOCATE

COMPONENTS

If you have not already done so, unpack the SP 170-I from its carton and remove all packing material around the SP 170-I. Remove the following loose items from the carton (see Figure A.1):

1.SP 170-I

2.Gun and cable assembly(1)

3.Literature and miscellaneous including:

a)This operating manual

b)Contact tips:

SP 170-I
2	.025” (0.6mm) for solid wire
2	.030” (0.8mm) for solid wire

1.035” (0.9mm) for cored wire

c)5/64” (2.0 mm) Hex key wrench for removal of drive roll.

4.10 ft (3,0 m) work cable.

5.Work clamp.

6.14.0 ft (4.3 m) .19” (4.8 mm) dia. gas hose

7.2- Hose clamps

8.Gas nozzle

(1)The gun is ready to feed .035" (0.9mm) diameter.

1		2
	E
		WE
		LDING AMP
		RANGE
	SP 1	70 -I

4

3

8

6

5

7

FIGURE A.1

SP 170-I