Lincoln Electric IM795 manual GUN Handle Parts Lincoln Electric, GUN Handle Parts Magnum 100L

D-5 MAINTENANCE D-5

GUN HANDLE PARTS (Lincoln Electric)

The gun handle consists of two halves that are held together with four screws. To open up the gun handle assembly, remove the four screws and pry down the trigger handle half with a screwdriver. See Figure D.3.

FIGURE D.3

GUN HANDLE PARTS (Magnum 100L)

The gun handle consists of two halves that are held together with a collar on each end. To open up the handle, turn the collars approximately 60 degrees counter-clockwise until the collar reaches a stop. Then pull the collar off the gun handle. If the collars are diffi- cult to turn, position the gun handle against a corner, place a screwdriver against the tab on the collar and give the screwdriver a sharp blow to turn the collar past an internal locking rib. See Figure D-4.

Screwdriver

Counter-clockwise

Cable

FIGURE D.4

SP 170-I