Lincoln Electric IM871-A TABLE D.1 ENGINE MAINTENANCE PARTS, FIGURE D.5 - SET SPARK PLUG GAP

D-3 MAINTENANCE D-3

CL EAN O R R E PL ACE SPAR K P LUG: Clean or replace the spark plug after every 100 hours of opera- tion or every season, whichever comes first. Do not blast the spark plug clean with an abrasive cleaning device. Clean the plug by scraping it or by using a wire brush. Wash the plug with a commercial sol- vent. After cleaning or when installing a new spark plug, set the terminal gap to .030 inch (.76 mm) with a feeler gauge. See Figure D.5.

2

1

FIGURE D.5 - SET SPARK PLUG GAP

Use the engine owner’s manual for latest Plug Gap Info.

CLEAN SPARK ARRESTER SCREEN: Refer to the engine owner’s manual that was shipped with your POWER-ARC 5500 for the proper cleaning instruc- tions.

TABLE D.1

ENGINE MAINTENANCE PARTS

Part		Robin / Subaru Part #	Honda Part #
SPARK PLUG		NGK BR6 HS	NGK BPR6ES
(RESISTOR)			DENSO W20EPR-U
FUEL FILTER		NONE	NONE
AIR CLEANER PANEL	279-32616-00		5266721 (17210-ZE2-505)
(Pleated Paper)
AIR PRE-CLEANER		279-32611-00	2538429 (17218-ZE2-821)
(AS NEEDED)		(CAN BE CLEANED AND REUSED AS NEEDED)

Refer to Table D.1 for engine maintenance parts. The part numbers are accurate at the time of printing. (Verify the current part number by referring to the engine owner￿s manual.

Replace or clean engine maintenance parts per the interval outlined in the engine owner￿s manual.

POWER-ARC 5500