brief display of the digit ‘1’, then F2fwill be a brief display of the digit ‘2’, then F3fwill be a brief display of the digit ‘9’. You can reset all of the configured options back to the factory default states by typing F8f. Use options F5fand F6fto restore mouse function on disconnected PS/2 CPU mouse connections.
F1 - Display firmware first digit (Note: F1 is Ffollowed by 1NOT l)
F2 - Display firmware second digit
F3 - Display firmware third digit
F5 - Restore PS/2 mouse function to the currently selected CPU’s mouse port F6 - Restore IntelliMouse function to the currently selected CPU’s mouse port
F8 - Reset all configurations to factory default settings. An ‘r’ will show briefly on the display to confirm that the reset has been completed.
4.7 Setting a security password
There are many situations where unrestricted access to corporate file servers or sensitive information needs to be controlled. In such circumstances, the CPU Switch Smart SUN-MAC-PC can be locked away in a room or secure cabinet and controlled remotely. In this mode typing the keyboard hotkeys together with 'L' will blank the screen, disconnect the keyboard and mouse from all of the computers and display ‘P’ on the CPU Switch Smart SUN-MAC-PC display. Control can only be regained by typing the correct password on the keyboard.
To set the password in configure mode, first type ‘P’ then (return). The display on CPU Switch Smart SUN-MAC-PC will change to show ‘=' and you can then type your password. The password is not case sensitive and can be any combination of key strokes, including the function keys, but excluding the (ctrl), (alt), (shift) and (return) keys and the keys that only appear on a Sun type keyboard (i.e. Help, Stop, Again, props, Undo, Front, Copy, Open, Paste, Find, Cut and the media control keys). When you have typed in your password type (return) to register it in the stored memory. Do not worry if you type the password incorrectly, you can always re-enter configure mode and set the password again. If you have lost the password and the CPU Switch Smart SUN-MAC-PC is locked, the unit may be unlocked by powering down the CPU Switch Smart SUN-MAC-PC, entering configure mode at power on (see section 2.6), and performing a complete reset using the F8 function.
NOTE - The password consists of a combination of key strokes rather like the code
