T5 - 15 seconds autoscan delay time before switching to next port T6 - 20 seconds autoscan delay time before switching to next port T7 - 30 seconds autoscan delay time before switching to next port T8 - 60 seconds autoscan delay time before switching to next port
U1 - CPU Switch Smart
(CPU Switch Smart
mouse or IntelliMouse
(CPU Switch Smart
mouse or IntelliMouse
(CPU Switch Smart
mouse or IntelliMouse
(CPU Switch Smart
U5 - CPU Switch Smart
(CPU Switch Smart
U7 – Cycle between all ports when switching with ‘Hotkeys + Tab’ or three button mouse (default)
U8 – Cycle between active ports only when switching with ‘Hotkeys + Tab’ or three button mouse
H1 - Hotkey combination is CTRL + ALT + command key (default)
H2 - Hotkey combination is CTRL + SHIFT + command key H3 - Hotkey combination is ALT + SHIFT + command key H4 - Hotkey combination is RIGHT ALT + command key
H5 - Hotkey combination is LEFT ALT + RIGHT ALT + command key
H6 - Hotkey combination is LEFT CTRL + LEFT ALT + command key
H7 - Hotkey combination is RIGHT CTRL + RIGHT ALT + command key H8 - No hotkey combination enabled
F1 | - Display firmware first digit (Note: F1 is Ffollowed by 1NOT l) |
F2 | - Display firmware second digit |
F3 | - Display firmware third digit |
F5 | - Restore PS/2 mouse function |
F6 | - Restore IntelliMouse function |
F8 | - RESET all configurations to default settings. (Display confirms with 'r'). |
CPU Switch Smart | Page 19 |