4.4 Keyboard hotkey combination

The keyboard hotkey combination is used to change a channel, set autoscan mode or secure the product (so that the password needs to be typed before it can be used again). The following keyboard hotkey combinations can be selected. These hotkey combinations are used together with the command keys to trigger the required CPU Switch Smart SUN-MAC-PC function. The left and right alt key combination is particularly suitable for extended keyboards where additional keys can be programmed to act as a combination of other keys. Such keyboards are supplied with many Gateway 2000 computers. Programming spare keys to trigger the hotkey combination allows channels to be selected via a single key stroke.

H1 - ‘CTRL’ and ‘ALT’ keys together (left or right hand keys operate) (default) H2 - ‘CTRL’ and ‘SHIFT’ keys together (left or right hand keys operate)

H3 - ‘ALT’ and ‘SHIFT’ keys together (left or right hand keys operate)

H4 - ‘RIGHT ALT’ key

H5 - ‘LEFT ALT’ and ‘RIGHT ALT’ keys together

H6 - ‘LEFT CTRL’ and ‘LEFT ALT’ keys together

H7 - ‘RIGHT CTRL’ and ‘RIGHT ALT’ keys together

H8 - No hotkey enabled

4.5 Cycling between all channels or just the active channels

The CPU Switch Smart SUN-MAC-PC can be set to cycle between all channels or just the active channels when using ‘Hotkeys + Tab’ or a three button mouse to switch the channel. This avoids wasting time viewing channels that are not active. Option are:

U7 – Cycle between all ports when switching with ‘Hotkeys + Tab’ or three button mouse (default)

U8 – Cycle between active ports only when switching with ‘Hotkeys + Tab’ or three button mouse

4.6 Firmware functions (version query, mouse restore and reset)

For technical support purposes, it may be necessary to find the firmware release version for the control software in your CPU Switch Smart SUN-MAC-PC. For example, if the release version is v1.29 the response shown to F1f will be a

CPU Switch Smart SUN-MAC-PCInstallation and Use

Page 35

Page 42
Image 42
Lindy 32251 manual Keyboard hotkey combination, Cycling between all channels or just the active channels