Lindy 32251 manual Screen saver time delay, Autoscan ‘lock on’ mode and delay time

Models: 32251

1 54
Download 54 pages 58 Kb
Page 39
Image 39

4.CPU Switch Smart SUN-MAC-PC configuration options

All the options described in this section are entered in CPU Switch Smart SUN- MAC-PC configure mode - see section 2.6 for instructions on entering configure mode.

4.1 Screen saver time delay

CPU Switch Smart SUN-MAC-PC contains a programmable screen saver which will blank the display after the set time delay with no keyboard or mouse activity. Simply typing at the keyboard or moving the mouse will re-enable the display. The display will flash whilst the CPU Switch Smart SUN-MAC-PC is in screen save mode.

B1 - screen saver disabled (default)

B2 - Blank screen after 1 minute of inactivity

B3 - Blank screen after 2 minutes of inactivity

B4 - Blank screen after 4 minutes of inactivity

B5 - Blank screen after 8 minutes of inactivity

B6 - Blank screen after 12 minutes of inactivity

B7 - Blank screen after 16 minutes of inactivity

B8 - Blank screen after 20 minutes of inactivity

4.2 Autoscan ‘lock on’ mode and delay time

CPU Switch Smart SUN-MAC-PC can be set to select each channel in turn for a period of time set by the autoscan delay time. Autoscan mode is entered by typing the hotkey keys together with ‘A’. By default, only those channels which have a powered up computer connected to them will be scanned. Sometimes it may be desirable to scan all channels, even if the attached computer is switched off (this will simply show a blank screen when it is selected). All the CPU Switch Smart SUN- MAC-PC’s ports will be scanned if option L2 is selected. Some applications may also require the CPU Switch Smart SUN-MAC-PC to power on in autoscan mode. This feature can be selected using the L3 or L4 options.

CPU Switch Smart SUN-MAC-PCInstallation and Use

Page 32

Page 39
Image 39
Lindy 32251 manual Screen saver time delay, Autoscan ‘lock on’ mode and delay time