To enter 6 Channel Direct mode:

1.Press the 6 CH button on the remote control.

The Model 950 is set to Bypass mode, circumventing any internal sur- round processing. The Front Panel Display and OSD display will read:

DIRECT

BYPASS

6 CH INPUT

00dB

 

 

2.Press the 6 CH button again to turn off 6 Channel Direct mode, or use the Source selection buttons on the remote or front panel to select another source.

If you use the remote 6 CH button, the unit will return to the previously chosen source and settings.

Setting the Front Panel Display Brightness

This control sets the Front Panel Display brightness. The default display bright- ness is set to be easily visible in a normally lit room. If you prefer to dim the display, for example, during movie viewing in a darkened room, you can access the VFD Brightness setting from the System Configuration menu.

To set the Front Panel Display brightness:

1.Press the MENU button to enter the Main Menu.

The Main Menu appears on the Front Panel Display and the OSD. The

cursor on the OSD should be pointing to the Input Configuration menu and INPUT CONFIG appears on the Front Panel Display.

2.Press the button until System Configuration is selected.

The cursor on the OSD should be pointing to the System Configuration menu and SYSTEM CONFIG appears on the Front Panel Display.

3.Press the SELECT button to enter the System Configuration menu.

The System Configuration menu appears on the Front Panel Display and the OSD (see figure 4 on page 28). The selected menu item should

be FRONT DISTANCE.

4.Press the button until the VFD Brightness menu is selected.

5.Use the < and > buttons to choose between Full and Half.

6.After making your selection, press the button twice to exit the Main Menu.

Setting the On Screen Display (OSD) Time Out

This menu is used to set how long the ON SCREEN DISPLAY will remain visible after a button is pushed or setting is changed.

IMPORTANT NOTE: When the time is set to 0Sec the OSD will not appear.

To set the OSD Time Out:

1.Press the MENU button to enter the Main Menu.

The Main Menu appears on the Front Panel Display and the OSD. The

cursor on the OSD should be pointing to the Input Configuration menu and INPUT CONFIG appears on the Front Panel Display.

2.Press the button until System Configuration is selected.

The cursor on the OSD should be pointing to the System Configuration menu and SYSTEM CONFIG appears on the Front Panel Display.

Owner’s Manual

Operation

3.Press the SELECT button to enter the System Configuration menu.

The System Configuration menu appears on the Front Panel Display and the OSD (see figure 4 on page 28). The selected menu item should

be FRONT DISTANCE.

4.Press the button until the OSD Time Out menu is selected.

5.Use the < and > buttons to cycle through the available options.

The following times appear as you scroll through them:

30Sec25Sec20Sec15Sec10sec5Sec 3Sec0sSec

6.After making your selection, press the button twice to exit the Main Menu.

Sleep Timer

This option allows you set how long the unit will remain on before automati- cally shutting off. This mode can be accessed using the SLEEP button on the remote control, or from System Configuration menu.

To set the Sleep Timer from the Main Menu:

1.Press the MENU button to enter the Main Menu.

The Main Menu appears on the Front Panel Display and the OSD. The

cursor on the OSD should be pointing to the Input Configuration menu and INPUT CONFIG appears on the Front Panel Display.

2.Press the button until System Configuration is selected.

The cursor on the OSD should be pointing to the System Configuration menu and SYSTEM CONFIG appears on the Front Panel Display.

3.Press the SELECT button to enter the System Configuration menu.

The System Configuration menu appears on the Front Panel Display and the OSD (see figure 4 on page 28). The selected menu item should

be FRONT DISTANCE.

4.Press the button until the Sleep Time Set menu is selected.

5.Use the < and > buttons to cycle through the available choices.

The following times appear as you scroll through them:

60Min50Min40Min30Min20Min10Min5Min

6.After making your selection, Press the button twice to exit the Main Menu.

To set the Sleep Timer using the SLEEP button:

1.Press the SLEEP button on the remote control.

The Front Panel Display and the OSD will show the following:

DVD

DOLBY D

SLEEP TIME SET: 0Min

2.Press the SLEEP button repeatedly to cycle through the time remaining options.

The following times appear as you press the SLEEP button:

60Min50Min40Min30Min20Min10Min5Min

The Sleep Timer menu will disappear automatically approximately 5 seconds after you make your selection.

Model 950 7.1 Channel Preamp/Processor

35

Page 35
Image 35
Dolby Laboratories 950 7.1 Setting the Front Panel Display Brightness, Setting the On Screen Display OSD Time Out

950 7.1 specifications

Dolby Laboratories has long been synonymous with cutting-edge audio technology, and the introduction of the Dolby 950 7.1 system is a testament to its commitment to delivering immersive sound experiences. Designed for both professional and home environments, the Dolby 950 7.1 system offers a comprehensive suite of features that elevate audio quality to new heights.

At its core, the Dolby 950 7.1 system incorporates a seven-channel setup, which includes left, center, right, left surround, right surround, left back, and right back channels, coupled with a powerful subwoofer for enhanced low-frequency response. This arrangement allows for a truly enveloping soundstage, capable of recreating the nuances of a live performance or the explosive action of a blockbuster film.

One of the standout features of the Dolby 950 7.1 system is its sophisticated audio processing technology. Dolby Digital Plus support ensures that users can experience high-definition audio without compromising on quality. This format allows for increased bit rates and efficient compression, making it ideal for streaming services and Blu-ray content.

Additionally, the system benefits from Dolby Atmos technology, which adds a new dimension of sound by allowing sound designers to place audio elements in three-dimensional space. This innovative approach creates a more natural and realistic listening experience, as sounds can now come from above as well as from the traditional horizontal plane.

Furthermore, the Dolby 950 7.1 is designed with user-friendliness in mind, featuring intuitive setup and calibration options. Advanced room correction technology adjusts audio output based on the unique acoustics of any given space, ensuring optimal performance regardless of environmental factors.

For those looking to integrate this system into a home theater, the Dolby 950 7.1 provides seamless connectivity options. HDMI inputs, optical and coaxial digital inputs, and support for various streaming protocols make it easy to connect to a wide range of devices, from gaming consoles to smart TVs.

In summary, the Dolby 950 7.1 system exemplifies the pinnacle of modern audio technology, boasting features such as seven-channel surround sound, Dolby Digital Plus, and Dolby Atmos capabilities. With its focus on immersive experiences, user-friendly setup, and versatile connectivity, the Dolby 950 7.1 is truly a game-changer for audio enthusiasts and content creators alike. Whether in a professional studio or a personal home theater, this system delivers an unparalleled auditory experience.