AM Antenna

Connect the AM antenna to the terminals labeled AM and E(arth) on the rear panel of the preamp/processor. Start by pressing the lever on the side of one of the terminals to the right. Next, insert one of the antenna wires into the opening. Finish by returning the lever to the up position, securing the wire. Do the same for the other wire to complete installation.

External Amplifier

IMPORTANT NOTE: Before attempting to plug any jacks into any power amplifier verify that the power amplifier is turned off and/or disconnected from the AC mains. Failure to do so can potentially result in severe damage to your amplifier and loudspeakers.

Use the audio jacks labeled OUTPUT to connect the Model 950 to an external power amplifier such as the Outlaw Audio Model 770 Power Amplifier. The Model 950 can output up to 7.1 channels of sound (seven satellite and one subwoofer channel) depending on source components and material.

The output jacks supplied by the Model 950 are: Left Front, Center, Right Front, Left Surround, Right Surround, Left Surround Back, Right Surround Back, and Subwoofer.

Be sure to verify that the correct outputs are connected to the appropriate input jacks (Left Front to Left Front, Right Surround Back to Right Surround Back, etc..)

When a powered subwoofer is used, connect the Subwoofer output jack to the Line Input jack on your subwoofer and follow any specific connection and/or configuration instructions supplied with the subwoofer. If your subwoofer is a passive speaker, connect the subwoofer output jack on the Model 950 to the input of the amplifier used to power the subwoofer, and then connect the subwoofer speaker itself to the amplifier.

Second Zone

Use the L and R channel ZONE OUT audio jacks to connect the Model 950 to the analog audio inputs of an external amplifier or other audio component in a second zone. The signal present will reflect the input selection of the Model

950.This may be adjusted using the Zone Menu or the MULTI button on the remote control.

Power Control Connections

The DC TRIGGER jacks are used to remotely turn-on other devices in your system when the Model 950 is powered on. Power is applied to the MAIN Trig- ger Output jack when the Model 950 is turned on from the Standby Mode. We recommend that this jack be used to turn on a compatible power amplifier such as those available from Outlaw, but it may also be used to activate compatible products such as projection screens or motorized blinds.

Connect a 3.5mm mono mini-plug between the DC Trigger MAIN jack on the rear panel of the Model 950 and the low voltage trigger jack of the device to be controlled to enable remote turn-on of that component. The ZONE Trigger jack is activated when the Multiroom system is turned on and should be used for control of amplifiers used to power the speakers installed in the remote zone. It will remain activated as long as the Multiroom system is on, even when the Model 950 is in the Standby mode for the main room.

Owner’s Manual

Connecting Your Model 950

Remote Control

The EXT REMOTE jacks allow you to extend the on-board remote control sensor on the Model 950’s front panel so that you may continue to control the 950 even when it is installed behind solid or smoked cabinet doors or when the front panel sensor is otherwise not visible to the remote control.

To extend the remote sensor connect an optional remote sensor to the MAIN jack.

The ZONE jack is provided to enable remote control of the Model 950’s multi- zone system through the use of an optional remote sensor in the second zone. Connect the sensor to the ZONE jack using a 3.5mm mono mini-plug and the wiring specified by the sensor’s manufacturer.

Power Connection

Insert the supplied power cord into the AC input of the rear panel of the preamp/processor. Do not use a power cord other than the one supplied with the Model 950. It’s designed for use with the Model 950 and should not be used with any other device.

CAUTION: Before you plug the power cord into an AC wall outlet, confirm that all connections to the preamp/processor have been made correctly.

WARNING: Never disconnect the power cord from the Model 950 while the other end is plugged into an AC outlet. Doing so may cause an electric shock. Always connect power by plugging into the AC out-

let last and disconnect by unplugging from the AC outlet first.

Model 950 7.1 Channel Preamp/Processor

21

Page 21
Image 21
Dolby Laboratories 950 7.1 AM Antenna, External Amplifier, Second Zone, Power Control Connections, Remote Control

950 7.1 specifications

Dolby Laboratories has long been synonymous with cutting-edge audio technology, and the introduction of the Dolby 950 7.1 system is a testament to its commitment to delivering immersive sound experiences. Designed for both professional and home environments, the Dolby 950 7.1 system offers a comprehensive suite of features that elevate audio quality to new heights.

At its core, the Dolby 950 7.1 system incorporates a seven-channel setup, which includes left, center, right, left surround, right surround, left back, and right back channels, coupled with a powerful subwoofer for enhanced low-frequency response. This arrangement allows for a truly enveloping soundstage, capable of recreating the nuances of a live performance or the explosive action of a blockbuster film.

One of the standout features of the Dolby 950 7.1 system is its sophisticated audio processing technology. Dolby Digital Plus support ensures that users can experience high-definition audio without compromising on quality. This format allows for increased bit rates and efficient compression, making it ideal for streaming services and Blu-ray content.

Additionally, the system benefits from Dolby Atmos technology, which adds a new dimension of sound by allowing sound designers to place audio elements in three-dimensional space. This innovative approach creates a more natural and realistic listening experience, as sounds can now come from above as well as from the traditional horizontal plane.

Furthermore, the Dolby 950 7.1 is designed with user-friendliness in mind, featuring intuitive setup and calibration options. Advanced room correction technology adjusts audio output based on the unique acoustics of any given space, ensuring optimal performance regardless of environmental factors.

For those looking to integrate this system into a home theater, the Dolby 950 7.1 provides seamless connectivity options. HDMI inputs, optical and coaxial digital inputs, and support for various streaming protocols make it easy to connect to a wide range of devices, from gaming consoles to smart TVs.

In summary, the Dolby 950 7.1 system exemplifies the pinnacle of modern audio technology, boasting features such as seven-channel surround sound, Dolby Digital Plus, and Dolby Atmos capabilities. With its focus on immersive experiences, user-friendly setup, and versatile connectivity, the Dolby 950 7.1 is truly a game-changer for audio enthusiasts and content creators alike. Whether in a professional studio or a personal home theater, this system delivers an unparalleled auditory experience.