Input Setup and Selection

Before calibrating your Model 950 and adjusting loudspeaker setup and con- figuration, you should first set up the sources connected to it. You will make your selections using the Input Configuration menu, shown below.

Figure 1

INPUT CONFIG

> SOURCE

:DVD

INPUT

:OPTICAL1

MODE

:DOLBY

TREBLE

DIGITAL

: 0dB

BASS

: 0dB

NIGHT

:NO COMP

RETURN TO MAIN MENU

Because of the extensive options available for each input source, we strongly recommend you use the chart on page 18 to record the settings for each input and component. Later, if you re-configure your system, this chart will help avoid confusion.

To configure an input:

1.Press the MENU button to enter the Main Menu.

The Main Menu appears on the Front Panel Display and the OSD. The

cursor on the OSD should be pointing to the Input Configuration menu and INPUT CONFIG appears on the Front Panel Display.

2.Press SELECT to enter the Input Configuration menu.

The Input Configuration menu appears on the Front Panel Display and the OSD (see figure 1). The selected menu item should be SOURCE.

3.Use the < and > buttons to select which particular Source you wish to configure.

The Source choices appear as follows as you scroll through them:

DVDVIDEO1VIDEO2VIDEO3VCRTUNERCD TAPEAUX1AUX 2

You can scroll in either direction using the < and > buttons .

4.Press the button once to select the Input menu.

5.Use the < and > buttons to select an Input for that source.

The input choices appear as follows as you scroll through them:

ANALOGOPTICAL1OPTICAL2OPTICAL3OPTICAL4COAXIAL1COAXIAL2

You can scroll in either direction using the < and > buttons .

If you connected the source to the Analog inputs, select: ANALOG.

If you connected the source to one of the Optical Digital inputs, select the appropriate one by choosing: OPTICAL 1, 2, 3, or 4.

If you connected the source to one of the Coaxial Digital inputs, select the appropriate one by choosing: COAXIAL 1 or 2.

Owner’s Manual

System Setup

NOTE: Always connect and configure the digital input source option if one is available from the specific component, as this will provide maximum performance and best sound quality.

Remember that you can always return to any menu to change your selection, should that be required.

6.Press the button once to select the Mode menu.

7.Use the < and > buttons to select a Mode for that source.

The available surround modes appear as follows as you scroll through them:

PLII-CPLII-MDOLBY PL7 STEREO

5STEREOSTEREOPLIIC+CRPLIIM+CRNEO:6-CNEO:6-MDOLBY DDOLBY EXDTSDTS-ES

You can scroll in either direction using the < and > buttons .

You should choose a surround mode to be the default for this source. Please refer to the table on page 12 for a detailed listing of all options. Remember that all available mode options can be selected for a Digital input source, but certain modes will not be available through the Analog input for that source.

Selecting the default mode will not exclude other modes of surround decoding. In fact, certain digital signals (Dolby Digital, DTS, some Dolby Digital EX, and others) contain a special digital “flag” that tells the 950 to switch to that surround mode. When the Model 950 receives one of these bitstreams it will switch to that mode of operation. Additionally, you can manually cycle through the available modes while the source is playing to choose the one you wish to use.

8.Press the button once to select the Treble menu.

9.Use the < and > buttons to adjust the Treble.

The amount of Treble boost can be adjusted ±6dB in 2dB increments.

10.Press the button once to select the Bass menu.

11.Use the < and > buttons to adjust the Bass.

The amount of Bass boost can be adjusted ±6dB in 2dB increments.

NOTE: Any tone control setting you make in this mode are global, and will affect all input sources and all output channels. They will remain in effect until you go back into the setup menu and change them or change them using the TONE button on the

remote control.

12.Press the button to select the Night menu.

NOTE: This option only operates with a Dolby Digital or Dolby Digital EX source and one of these modes is active.

This option allows you to set the amount of Dynamic Range Compression used when the Model 950 is placed into the NIGHT mode. This mode can also be selected by pressing the NIGHT button on the remote control.

There are two types of automatic compression control built into the Dolby Digital process. Compression makes the loud parts softer and the soft parts louder to reduce the difference between the two.

Model 950 7.1 Channel Preamp/Processor

23

Page 23
Image 23
Dolby Laboratories 950 7.1 owner manual Input Setup and Selection, You can scroll in either direction using the and buttons

950 7.1 specifications

Dolby Laboratories has long been synonymous with cutting-edge audio technology, and the introduction of the Dolby 950 7.1 system is a testament to its commitment to delivering immersive sound experiences. Designed for both professional and home environments, the Dolby 950 7.1 system offers a comprehensive suite of features that elevate audio quality to new heights.

At its core, the Dolby 950 7.1 system incorporates a seven-channel setup, which includes left, center, right, left surround, right surround, left back, and right back channels, coupled with a powerful subwoofer for enhanced low-frequency response. This arrangement allows for a truly enveloping soundstage, capable of recreating the nuances of a live performance or the explosive action of a blockbuster film.

One of the standout features of the Dolby 950 7.1 system is its sophisticated audio processing technology. Dolby Digital Plus support ensures that users can experience high-definition audio without compromising on quality. This format allows for increased bit rates and efficient compression, making it ideal for streaming services and Blu-ray content.

Additionally, the system benefits from Dolby Atmos technology, which adds a new dimension of sound by allowing sound designers to place audio elements in three-dimensional space. This innovative approach creates a more natural and realistic listening experience, as sounds can now come from above as well as from the traditional horizontal plane.

Furthermore, the Dolby 950 7.1 is designed with user-friendliness in mind, featuring intuitive setup and calibration options. Advanced room correction technology adjusts audio output based on the unique acoustics of any given space, ensuring optimal performance regardless of environmental factors.

For those looking to integrate this system into a home theater, the Dolby 950 7.1 provides seamless connectivity options. HDMI inputs, optical and coaxial digital inputs, and support for various streaming protocols make it easy to connect to a wide range of devices, from gaming consoles to smart TVs.

In summary, the Dolby 950 7.1 system exemplifies the pinnacle of modern audio technology, boasting features such as seven-channel surround sound, Dolby Digital Plus, and Dolby Atmos capabilities. With its focus on immersive experiences, user-friendly setup, and versatile connectivity, the Dolby 950 7.1 is truly a game-changer for audio enthusiasts and content creators alike. Whether in a professional studio or a personal home theater, this system delivers an unparalleled auditory experience.