Operation

After you have programmed the remote control for your equipment, use the follow- ing procedures to operate the components of your home entertainment system:

To operate a system component that you have programmed:

1. Press the Source button that you wish to operate

For example, to operate a TV, press the TV button; to operate a VCR, press the VCR button, etc.

2.Aim the remote control at the device and press the POWER button to turn on the device.

3.Press the buttons that send out the commands you desire.

Note: Some audio/video devices have separate buttons for POWER ON and POWER OFF. To operate these devices on the remote, press the corresponding DEVICE Button to turn the equipment ON and press the POWER button to turn the equipment OFF.

Please try all the functions of this remote control with your equipment. The most common functions are labeled on the remote. However, some of the secondary functions might be stored under a button that has a different name from the one on your original remote control.

Source Selection Buttons

Pressing a Source button at the top of the remote control performs the fol- lowing functions:

If the Model 950 is in Standby mode, powers up the unit.

Changes the Source input mode on the remote control.

Backlighting

Pressing the LIGHT button illuminates all the buttons on the remote control for 7 seconds. The backlight is extended an additional 7 seconds with any button press while the backlight is on.

Volume Control Punch Through

You can program the remote control so that the Model 950 VOLUME UP, VOLUME DOWN and MUTE functions will operate while the remote is set to control another source.

For example, using the Punch Through function, you can raise, lower or mute the volume of the preamp/processor while the remote control is in the SAT mode.

Note: When this feature is active, the AUDIO or TV VOLUME and MUTE will override any existing volume controls in that mode.

To program the remote for volume control Punch Through:

1.Press the Source button of the device you wish to program for volume control Punch Through and the MUTE button simultaneously

The red LED and the selected Source button will illuminate.

2.Press the VOLUME UP button.

The red LED and the selected Source button will blink.

Owner’s Manual

Remote Control Setup and Operation

3.Press the AUD button to enable volume control of the Model 950.

OR

Press the TV button to enable volume control of the television.

The LED and Source button will blink twice and then go out.

The VOLUME UP, VOLUME DOWN and MUTE buttons will now control the Punch Through device while another Source is selected.

To turn off volume control Punch Through for a source:

1.Press the Source button of the device you wish to remove the Punch Through program from and the MUTE button simultaneously

The red LED and the selected Source button will illuminate.

2.Press the VOLUME UP button.

The red LED and the selected Source button will blink.

3.Press the Source button again.

The Model 950 Punch Through function is now turned off. The VOLUME and MUTE of the original device will operate on the remote control.

Macro Buttons

The four Macro buttons (M1-M4) are used to store and send a sequence of up to 10 commands each. They can be programmed in the AUD mode, but can also be accessed in other modes. Macros can be used to turn components on or off or select favorite channels.

Note: The MUTE button is used to designate POWER commands dur-

ing Macro Button programming. See the Example: Memory Button Programming for further description.

To program a macro button:

1.Press AUD and MUTE buttons simultaneously.

The red LED and the AUD button remain lit.

2.Press the Macro button you wish to program.

3.Press up to 10 commands you would like to include in the macro sequence.

Pressing a Device button to change modes is counted as one command.

4.Press the CHANNEL UP button to store the commands.

The red LED and the AUD button will blink twice to confirm the program and then turn off.

The Macro button will now send the sequence of commands you programmed when pressed.

To erase a Macro sequence:

1.Press AUD and MUTE buttons simultaneously.

The red LED and the AUD button remain lit.

2.Press the Macro button that you wish to erase.

3.Press the CHANNEL UP button to store the commands.

The red LED and the AUD button will blink twice to confirm the program and then turn off.

The stored sequence is now erased from the Macro button.

Note: Any previously stored commands on a Memory Button will be erased when new commands are stored on the same Memory Button.

Model 950 7.1 Channel Preamp/Processor

39

Page 38 Page 40
Page 39
Image 39
Dolby Laboratories 950 7.1 Operation, Source Selection Buttons, Backlighting, Volume Control Punch Through, Macro Buttons
Page 38 Page 40

950 7.1 specifications

Dolby Laboratories has long been synonymous with cutting-edge audio technology, and the introduction of the Dolby 950 7.1 system is a testament to its commitment to delivering immersive sound experiences. Designed for both professional and home environments, the Dolby 950 7.1 system offers a comprehensive suite of features that elevate audio quality to new heights.

At its core, the Dolby 950 7.1 system incorporates a seven-channel setup, which includes left, center, right, left surround, right surround, left back, and right back channels, coupled with a powerful subwoofer for enhanced low-frequency response. This arrangement allows for a truly enveloping soundstage, capable of recreating the nuances of a live performance or the explosive action of a blockbuster film.

One of the standout features of the Dolby 950 7.1 system is its sophisticated audio processing technology. Dolby Digital Plus support ensures that users can experience high-definition audio without compromising on quality. This format allows for increased bit rates and efficient compression, making it ideal for streaming services and Blu-ray content.

Additionally, the system benefits from Dolby Atmos technology, which adds a new dimension of sound by allowing sound designers to place audio elements in three-dimensional space. This innovative approach creates a more natural and realistic listening experience, as sounds can now come from above as well as from the traditional horizontal plane.

Furthermore, the Dolby 950 7.1 is designed with user-friendliness in mind, featuring intuitive setup and calibration options. Advanced room correction technology adjusts audio output based on the unique acoustics of any given space, ensuring optimal performance regardless of environmental factors.

For those looking to integrate this system into a home theater, the Dolby 950 7.1 provides seamless connectivity options. HDMI inputs, optical and coaxial digital inputs, and support for various streaming protocols make it easy to connect to a wide range of devices, from gaming consoles to smart TVs.

In summary, the Dolby 950 7.1 system exemplifies the pinnacle of modern audio technology, boasting features such as seven-channel surround sound, Dolby Digital Plus, and Dolby Atmos capabilities. With its focus on immersive experiences, user-friendly setup, and versatile connectivity, the Dolby 950 7.1 is truly a game-changer for audio enthusiasts and content creators alike. Whether in a professional studio or a personal home theater, this system delivers an unparalleled auditory experience.
Top Page Image Contents