8Numeric Keypad buttons (see page 32)

Use these buttons for control functions requiring you to enter numbers. For numerals over 10, press the 10+ button for every multiple of ten, fol- lowed by a second digit.

9Theater Compensation button (see page 34)

The T.COMP button toggles Theater Compensation processing on and off.

10 Surround/Data Format buttons (see page 31)

Press the 2, DTS, CR SURR or STEREO button once to select a surround processing format .

Press the same button again to cycle through the various processing modes available for the selected format.

Pressing and holding the button for five (5) seconds calls up the Data Format menu.

11 DIGITAL button (see page 30)

Cycles between the six digital inputs and the analog input on the Model

950.The selected input is shown on the FRONT PANEL DISPLAY and the OSD, if active.

12 NIGHT button (see page 33)

Cycles through the various Night dynamic range compression modes.

13 Macro Control buttons (see page 39)

The M1, M2, M3 and M4 buttons are used to play back macros, which are preprogrammed sequences of IR commands that you have entered in the remote.

14 Tuning and Volume buttons (see page 30, 32, 39)

Use the and CH/TUNE buttons to adjust the Model 950 tuner’s frequency down or up when AUD is selected as the input source. These buttons also operate the tuner or change channels of other devices that are selected as the current source.

Use the and VOL buttons to adjust the volume of the Model 950 from –80dB to +10dB. These buttons also operate the volume control of other devices that are selected as the current source.

15MENU button (see page 22)

Calls up the Main Menu on the FRONT PANEL DISPLAY and the OSD, if active.

16 Navigation and Select buttons (see page 22)

Use the four Navigation buttons to move through menu options shown on the FRONT PANEL DISPLAY or OSD. Use the SEL button to confirm selections made in menus.

17TONE button (see page 23)

Press this button to select either the Treble or Bass for adjustment. Once the desired parameter is selected, use the < or > navigation buttons to change the setting. The Treble and Bass can be adjusted ±6dB. Settings are shown on the on the FRONT PANEL DISPLAY and the OSD, if active.

Owner’s Manual

Remote Control

18 Auxiliary Input buttons (see page 30)

Use the AUX 1 and 2 buttons to select the device connected to one of the two AUX inputs as the active source.

19 6 Channel Direct button (see page 34)

Pressing the 6 CH button selects as the source the analog signal from the Multi Channel inputs (5 channels plus subwoofer) on the Model 950, as well as activating the dedicated Bass Management selected by the rear panel switch. Pressing the button again returns the unit to the previously selected source.

20 BYPASS button (see page 31)

Activates Stereo Bypass mode, sending the signal from the analog input in use directly to the volume control, bypassing all digital processing. Pressing the button again returns the unit to the previously selected mode.

21 AM/FM button (see page 32)

Press this button to select the 950’s tuner as the input source, or to switch between the AM and FM bands when the tuner is active. Pressing this button when the 950 is in Standby mode will also turn the unit on.

22 Tuner Mode button (see page 32)

Press the T.MODE button to switch the FM tuner between Mono and Stereo.

23 SLEEP button (see page 35)

Sets the 950’s built-in sleep function timer.

24 Preset Scan button (see page 32)

Pressing this button scans the AM or FM stations preset in the tuner’s memory. Pressing it again stops the scan at the preset indicated in the

FRONT PANEL DISPLAY.

25 Memory button (see page 32)

Press and hold the MEM button to store an AM or FM station into a preset location. Once the FRONT PANEL DISPLAY begins to flash Memory 01, enter the desired preset number using the numeric keypad on the remote.

26 Light

Illuminates the Remote Control buttons for 7 seconds.

Model 950 7.1 Channel Preamp/Processor

11

Page 10 Page 12
Page 11
Image 11
Dolby Laboratories 950 7.1 owner manual Sets the 950’s built-in sleep function timer
Page 10 Page 12

950 7.1 specifications

Dolby Laboratories has long been synonymous with cutting-edge audio technology, and the introduction of the Dolby 950 7.1 system is a testament to its commitment to delivering immersive sound experiences. Designed for both professional and home environments, the Dolby 950 7.1 system offers a comprehensive suite of features that elevate audio quality to new heights.

At its core, the Dolby 950 7.1 system incorporates a seven-channel setup, which includes left, center, right, left surround, right surround, left back, and right back channels, coupled with a powerful subwoofer for enhanced low-frequency response. This arrangement allows for a truly enveloping soundstage, capable of recreating the nuances of a live performance or the explosive action of a blockbuster film.

One of the standout features of the Dolby 950 7.1 system is its sophisticated audio processing technology. Dolby Digital Plus support ensures that users can experience high-definition audio without compromising on quality. This format allows for increased bit rates and efficient compression, making it ideal for streaming services and Blu-ray content.

Additionally, the system benefits from Dolby Atmos technology, which adds a new dimension of sound by allowing sound designers to place audio elements in three-dimensional space. This innovative approach creates a more natural and realistic listening experience, as sounds can now come from above as well as from the traditional horizontal plane.

Furthermore, the Dolby 950 7.1 is designed with user-friendliness in mind, featuring intuitive setup and calibration options. Advanced room correction technology adjusts audio output based on the unique acoustics of any given space, ensuring optimal performance regardless of environmental factors.

For those looking to integrate this system into a home theater, the Dolby 950 7.1 provides seamless connectivity options. HDMI inputs, optical and coaxial digital inputs, and support for various streaming protocols make it easy to connect to a wide range of devices, from gaming consoles to smart TVs.

In summary, the Dolby 950 7.1 system exemplifies the pinnacle of modern audio technology, boasting features such as seven-channel surround sound, Dolby Digital Plus, and Dolby Atmos capabilities. With its focus on immersive experiences, user-friendly setup, and versatile connectivity, the Dolby 950 7.1 is truly a game-changer for audio enthusiasts and content creators alike. Whether in a professional studio or a personal home theater, this system delivers an unparalleled auditory experience.
Top Page Image Contents