Owner’s Manual

Model 950 Front Panel

Complete Multiroom System

When properly connected, a second source may be sent to a remote room, complete with remote volume control, source selection and tuner control. A trigger for the second zone allows a second amplifier to turn on and off independently of the main room. This system may also be used to record an input source that is different from the one being used in the main room.

2 Low voltage triggers

One trigger provides automatic turn on/off of compatible power ampli- fiers such as the Outlaw Model 770/755/750 or relay-controlled products such as projection screens, blinds and lighting systems. A separate trigger provides turn on/off control for an amplifier used with the multiroom system.

Unpacking

The carton and packing materials used in shipping your new Preamp/Processor were specially designed to cushion it from the shocks and vibration of shipping. We strongly suggest that you save the carton and packing materials to use if you move, or if the unit ever needs to be shipped back to us for any reason.

To minimize the size of the carton in storage, you may wish to flatten it by carefully opening the top and bottom flaps and folding the carton flat. Other cardboard inserts may be stored in the same manner. Packing materials that cannot be collapsed should be saved along with the carton in a plastic bag.

Although not particularly heavy, the 950 has many front mounted controls and rear panel connectors, so be careful when lifting it so as not to cause damage.

Accessories

After unpacking the Model 950, please check that the following accessories are in the box:

Remote Control with Batteries AC Power Cord

FM Antenna

AM Loop Antenna

Owner’s Manual

If for any reason any of the above is missing from your shipment, please contact Outlaw Audio immediately.

Model 950 Front Panel

1Standby power button (see page 22, 30)

When the main POWER switch on the rear panel is in the ON position, pressing this button turns the unit on. The yellow STANDBY/MUTE indica- tor light goes out.

Pressing this button again returns the Preamp/Processor to standby mode. The STANDBY/MUTE indicator light illuminates.

In this mode of operation, the FRONT PANEL DISPLAY is turned off, control functions are disabled, and all outputs to the main zone are turned off. However, outputs to the remote zone remain active and available.

2FM MODE button (see page 32)

Sets the FM Tuner to Mono mode. The letter “M” appears next to the Tuner Preset number in the FRONT PANEL DISPLAY. Pressing the button again returns the FM Tuner to Stereo mode.

3TUNE buttons (see page 32)

The and buttons adjust the tuner’s frequency down or up when Tuner is selected as the input source.

4FM/AM button (see page 32)

Toggles between AM and FM frequency bands. Pressing this button when listening to any other source automatically changes the unit’s input source to the tuner and the last station chosen.

5FRONT PANEL DISPLAY (see page 9)

Indicates program source, DSP mode, tuner preset and/or frequency, digital input, volume level, and other preamp/processor/tuner operating information. Also displays menu selections.

6TEST TONE button (see page 27)

Press this button to use the internal test generator to adjust the output level for each channel. As the test signal circulates among the channels press the < or > Navigation buttons to make an adjustment.

7DIGITAL SELECT button (see page 30)

Press this button to select a digital input. Each press of the button scrolls to the next input, as shown on the FRONT PANEL DISPLAY or the ON SCREEN DISPLAY. When ANALOG is shown, the L/R analog input associated with the input in use will be used.

8STEREO BYPASS button (see page 31)

Defeats the DSP processing section and provides an unaltered, full-band- width stereo signal to the Left and Right channel outputs on the rear panel. However, the subwoofer DSP crossover remains active and bass frequencies are available at the subwoofer output should you wish to augment your front LR speaker’s low frequency performance. The word BYPASS appears in the FRONT PANEL DISPLAY. Pressing the button again returns the unit to the previously selected DSP mode.

9TRIM button (see page 33)

Press this button to adjust the output of an individual channel above or below the master volume level setting from -15dB to +10dB. Press the < or > Navigation buttons to adjust the level for the channel indicated in the FRONT PANEL DISPLAY or the ON SCREEN DISPLAY and then press the button again to select another channel.

6

Outlaw Audio

Page 5 Page 7
Page 6
Image 6
Dolby Laboratories 950 7.1 owner manual Unpacking, Accessories, Model 950 Front Panel
Page 5 Page 7

950 7.1 specifications

Dolby Laboratories has long been synonymous with cutting-edge audio technology, and the introduction of the Dolby 950 7.1 system is a testament to its commitment to delivering immersive sound experiences. Designed for both professional and home environments, the Dolby 950 7.1 system offers a comprehensive suite of features that elevate audio quality to new heights.

At its core, the Dolby 950 7.1 system incorporates a seven-channel setup, which includes left, center, right, left surround, right surround, left back, and right back channels, coupled with a powerful subwoofer for enhanced low-frequency response. This arrangement allows for a truly enveloping soundstage, capable of recreating the nuances of a live performance or the explosive action of a blockbuster film.

One of the standout features of the Dolby 950 7.1 system is its sophisticated audio processing technology. Dolby Digital Plus support ensures that users can experience high-definition audio without compromising on quality. This format allows for increased bit rates and efficient compression, making it ideal for streaming services and Blu-ray content.

Additionally, the system benefits from Dolby Atmos technology, which adds a new dimension of sound by allowing sound designers to place audio elements in three-dimensional space. This innovative approach creates a more natural and realistic listening experience, as sounds can now come from above as well as from the traditional horizontal plane.

Furthermore, the Dolby 950 7.1 is designed with user-friendliness in mind, featuring intuitive setup and calibration options. Advanced room correction technology adjusts audio output based on the unique acoustics of any given space, ensuring optimal performance regardless of environmental factors.

For those looking to integrate this system into a home theater, the Dolby 950 7.1 provides seamless connectivity options. HDMI inputs, optical and coaxial digital inputs, and support for various streaming protocols make it easy to connect to a wide range of devices, from gaming consoles to smart TVs.

In summary, the Dolby 950 7.1 system exemplifies the pinnacle of modern audio technology, boasting features such as seven-channel surround sound, Dolby Digital Plus, and Dolby Atmos capabilities. With its focus on immersive experiences, user-friendly setup, and versatile connectivity, the Dolby 950 7.1 is truly a game-changer for audio enthusiasts and content creators alike. Whether in a professional studio or a personal home theater, this system delivers an unparalleled auditory experience.
Top Page Image Contents