CABLE CONNECTION | CABLE SPECIFICATION |
LINDY CPU Switch to PCs | These require a special converter to connect the RS232 lines |
1 to 16 | present on the LINDY CPU Switch mouse ports to the RS232 |
RS232 serial mice | port on a PC. The wiring is identical to that used by Microsoft |
| for their autosensing mouse adapter and is shown below: |
| Cables should be no longer than 30 metres. |
Expansion port pin | The 15 way D connector located on the back of the LINDY |
assignments | CPU Switch provides connections for the remote control |
| module and allows an external RS232 device to control the |
| LINDY CPU Switch. See section 3.5 for more details. |
| Pin 9 = GND |
| Pin 11 = RXD |
| Other pins to be left unconnected |
LINDY ELECTRONICS LTD | Installation & Use – English Guide | Page 35 |
