Linear BGUS-D, SG-D manual Safety Information, PRE-INSTALLATION Information

MODEL BGUS/BGUS-D • SG/SG-D OPERATOR INSTALLATION GUIDE

GATE OPERATOR CLASSIFICATIONS

All gate operators can be divided into one of four different classifications, depending on their design and usage.

Class I Residential Vehicular Gate Operator

A vehicular gate operator intended for use in a home of one to four single family dwellings, or garage or parking area associated with these dwellings.

Class II Commercial / General Access Vehicular Gate Operator

A vehicular gate operator intended for use in a commercial location or building such as a multifamily housing unit of five or more single family units, hotel, retail store or other building servicing the general public.

Class III Industrial / Limited Access Vehicular Gate Operator

A vehicular gate operator intended for use in an industrial location or building such as a factory or loading dock area or other location not intended to service the general public.

Class IV Restricted Access Vehicular Gate Operator

A vehicular gate operator intended for use in a guarded industrial location or building such as an airport security area or other restricted access locations not servicing the general public, in which unauthorized access is prevented via supervision by security personnel.

LINEAR barrier gate operator models BGU and BGU-D meet the requirements for all four classifications.

SAFETY INFORMATION

AND WARNINGS

Read the following before beginning to install LINEAR barrier gates:

1.All electrical connections to the power supply must be made by a licensed electrician and must observe all national and local electrical codes.

2.A separate power-disconnect switch should be located near the operator so that primary power can be turned off when necessary.

3.Barrier gate operators are for vehicular traffic only. Pedestrians must be supplied with a separate access opening.

4.Never reach between, through or around the fence to operate the gate.

5.You must install all required safety equipment.

PRE-INSTALLATION

INFORMATION

Before unpacking, inspect the carton for exterior damage. If you find damage, advise the delivery carrier of a potential claim.

Inspect your package carefully. You can check your accessory box parts with the enclosed packing slip for your convenience. Claims for shortages will be honored for only 30 days from the date of shipment.

Before installing the operator, read this manual completely to ensure all requirements for proper installation are present. Verify that the voltage to be used matches the voltage of the operator.

The following contact or non-contact obstruction detection devices have been approved for use with LINEAR barrier gate operators as part of a UL325 compliant installation:

2520-441	MMTC Model IR-55 photo eye, 165’ with
	mounting hardware
2520-031	MMTC Model E3K photo eye, 28’ with
	mounting hardware

-3-