ADSL Gateway with 4-Port Switch

7.Select the Tunnel Setting tab and click The tunnel endpoint is specified by this IP Address radio button. Then, enter the Router’s WAN IP Address.

8.Select the Connection Type tab and click All network connections. Then, click the OK or Close button to finish this rule.

Tunnel 2: Router->win

9.In the new policy’s properties screen, make sure that “win -> Router” is selected and deselect the Use Add Wizard check box. Then, click the Add button to create the second IP filter.

Appendix B: Configuring IPSec between a Windows 2000 or XP Computer and the Gateway

Figure B-16: Tunnel Setting Tab

Figure B-17: Connection Type Tab

Figure B-18: Properties Screen

57

How to Establish a Secure IPSec Tunnel

Page 64
Image 64
Linksys AG041 manual Tunnel 2 Router-win, Figure B-16 Tunnel Setting Tab