Linksys BEFN2PS4 manual Filters, To Modify Filter Settings, Instant BroadbandTM Series

Instant BroadbandTM Series

3. Click Upgrade Firmware. A new page will appear.

4.Enter your Router’s administration password into the Password Confirm box.

5.Click the Browse button and find the firmware upgrade file that you downloaded from the Linksys website. Double-click the upgrade file. This will place the file into the “File Path:” box.

6.When the correct file is in the “File Path:” box, click the Upgrade button and follow the instructions there. This will complete your firmware upgrade.

Filters

For information on setting up your Net2Phone Account and how to make phone calls using your account, refer to the Net2Phone section.

EtherFast® Cable/DSL & Voice Router powered by Net2Phone

Filters

Filters block specific internal users from accessing the Internet. You can set up a filter through an IP address or a network Port number.

To Modify Filter Settings

•Enter the IP addresses you wish to filter into the IP address fields. The users who have these IP addresses will not be able to access the Internet.

•You can also filter users by entering their network port number and protocol (UDP, TCP or both). Enter the port numbers and protocol you want to filter into the port numbers fields. Users who are connected to the Router will no longer be able to access any port number listed there.

28 29