Linksys FESWSK05 v3, EZXS55W manual

Instant EtherFast® Series

Fast Ethernet Switched 10/100 Network In a Box

8.A list of services will appear. Click Next to approve these services, fol- lowed by Next again.

11.Windows NT will copy the necessary network drivers to your PC. When the copying is complete, you will see a list of installed bindings. Change the bind- ings settings if needed and click Next. Click Next again.

Note: For information and help on choosing your bindings, services and protocols, ask your network administrator, or check your Windows NT documentation.

9.Windows NT will probably ask you to supply your original Windows NT CD-ROM or setup disks. If so, place your Windows NT CD-ROM in your CD drive. If the CD-ROM loads a pop-up window, close it. Type D:\i386 (or the appropriate CD-ROM drive letter) in the box and click Continue.

10.Windows NT will ask you to choose a media type for the EtherFast® card. Choose AutoSense. You can change these settings later if necessary. When finished, click OK.

12.Choose either Workgroup or Domain, depending on the type of network you're setting up. (Your Microsoft documentation explains the difference between Workgroups and Domains.) Click Next.

21 22