Linksys EZXS55W manual Configuring the LAN Card, Client for Microsoft Networks, NetBEUI TCP/IP

Instant EtherFast® Series

7.The Completing the Found New Hardware Wizard dialog box will appear, indicating that the driver has been successfully installed. Click Finish.

8.Remove the driver disk from the floppy drive.

The Windows 2000 driver installation is complete. If you want to share files or printers, refer to your Windows 2000 documentation or check with your system administrator. Return now to the section called Installing the Workgroup Switch to complete the installation of your Network In A Box.

Fast Ethernet Switched 10/100 Network In a Box

Configuring the LAN Card

Configuring the LAN Card for Windows 95, 98, and Millennium

1.Once you are back at the Windows desktop, click on your taskbar's Start button, then Settings, then Control Panel, and then double-click the Network icon.

2.The Network window will appear. Click on the Configuration tab. A window similar to the one below will appear. There may be other compo- nents listed in addition to the ones shown below (for example, a Dial-up Adapter), which is normal. If any of the components shown below are missing, however, you’ll need to manually install them. Refer to Manually Installing the Network Components for more information.

•Client for Microsoft Networks

•Linksys LNE100TX(v5) Fast Ethernet Adapter

•IPX/SPX-compatible Protocol

•NetBEUI

•TCP/IP

31 32