Linksys EZXS55W, FESWSK05 v3 Installing the LAN Card Driver if Networking is Already Installed

Instant EtherFast® Series

13.Click Finish. When asked if you want to restart your computer, remove the Driver Disk and click Yes.

14.Once your PC has rebooted and you are logged in, double-click the Network Neighborhood icon on your desktop. Ensure that you have access to the network. If you do, your card has been properly installed.

•If you had previously installed any NT service packs, you must go back and re-install those service packs now.

•If you need to install the TCP/IP protocol, refer to your system adminis- trator or your Windows NT documentation. Linksys does not provide technical support for the configuration or troubleshooting of the TCP/IP protocol

The Windows NT Installation and Setup of the EtherFast® 10/100 LAN Card is complete. Do not continue on with the next set of instructions. They are for Windows NT users who already had their networking con- figured. Return now to the section called Installing the Workgroup Switch to complete the installation of your Network In A Box.

Note: If you had previously installed any NT service packs, you must re-install them. Otherwise, you may receive Not Enough Service Storage Space errors in the Event Viewer.

Fast Ethernet Switched 10/100 Network In a Box

Installing the LAN Card Driver if Networking is Already Installed

The following steps will install the EtherFast© 10/100 LAN Card’s driver soft- ware on your PC, enabling your PC to properly communicate with the card. Remember that you must be logged on as a network administrator (or as a user with administrative rights) to continue.

1.Click on Start, Settings, Control Panel, then double-click on the Network icon.

2.When the networking window appears, choose the Adapters tab. Click the Add button.

Note: For information and help on choosing your bindings, services and protocols, ask your network administrator, or check your Windows NT documentation.

23 24