Instant EtherFast® Series
installation files. If it does, direct Windows to the appropriate location, (e.g., D:\win98 if you have the Windows 98
13.Once Windows has copied the necessary files, the System Settings Change window appears. Remove all disks from your PC and click Yes to restart your PC. If you don't see this window, simply shut down Windows 98 and restart your PC. Remember to remove any installation disks or
14.A Logon window will appear, requiring you to enter a User name and Password. Make up a user name and password (if you haven’t already) and click OK. Do not click the Cancel button or Escape key. Clicking either of these buttons will prevent you from logging into the network. If the logon does not appear or if it does not allow you to log on, refer to the Troubleshooting section.
15.Once you are at the Windows 98 desktop,
•If you can see your computer along with all the other computers on the network in Network Neighborhood, then the Windows 98 net- work configuration is complete. Return now to the section called Installing the Workgroup Switch to complete the installation of your Network In A Box.
•Continue with Sharing Your Files and Printers in the Appendix if you want your PC’s data or printer to be available to others on the network.
•If you don't see all the computers in your network (including your own) in Network Neighborhood, press the F5 key on your keyboard a few times to refresh the screen. If that doesn’t work, refer to the Troubleshooting section.
Fast Ethernet Switched 10/100 Network In a Box
Novell NetWare Server Setup
Overview
The EtherFast® 10/100 LAN Card driver will be automatically installed dur- ing all of the following NetWare installation procedures. During the setup you may want to refer to your NetWare Installation Manual for help.
Note: If, after any of these installations, the operating system asks you for a slot number, NetWare needs to know which PCI slot your card has been installed to. The slot variable can be added to the driver line as shown in the example below:
load c:\lne100TX\LNE100TX.lan slot = 3 frame = ethernet_802.2 name = nserv
bind ipx to nserv net = 15
In this example, the card is in slot 3, the frame is Ethernet_802.2, the net value is 15 (arbitrary) and the name is nserv (arbitrary name).
Installing a 3.12 Server
1.Create a directory in the DOS partition of your file server called LNE100TX.
2.Copy the following files from the EtherFast Card Driver Disk to your file server's new LNE100TX directory:
a:\netware\server\nw31x\NBI31X.NLM
a:\netware\server\nw31x\MSM31X.NLM
a:\netware\server\nw31x\ETHERTSM.NLM
a:\netware\server\nw31x\LNE100TX.LAN
3.Following the Load LAN Driver Module instructions in your Novell NetWare 386 v3.12 manual, start NetWare and configure the server (if you haven’t already).
4.Load the above LAN drivers using the LOAD command.
5.If the LAN driver is not located in the default directory, specify the file's path on the command line. The LOAD command prompts you for the con- figuration parameters if they are not supplied on the command line.
35 | 36 |
