Linksys EZXS55W, FESWSK05 v3 manual Installing the Drivers for Windows Millennium, Overview

Instant EtherFast® Series

Installing the Drivers for Windows Millennium

Overview

After physically installing the LAN Card in your computer, follow these instructions to install the network driver. The installation procedure for the net- work driver will depend on your current system configuration. If at any time during the installation you encounter problems, consult the Troubleshooting section.

Installing the NetworkLAN Card’sCard’sDriversDriver

1.If you haven’t already, start up your computer.

2.Windows Millennium will automatically detect the presence of the PCI Ethernet Controller hardware in your computer.

3.Insert the EtherFast® 10/100 LAN Card Driver Disk into your floppy drive while the Add New Hardware Wizard window is visible. Select Specify the location of the driver (Advanced) option. Click Next.

Fast Ethernet Switched 10/100 Network In a Box

4.Select Search for the best driver for your device (Recommended) and select Specify a location. Then, type “A:\WINME” in the drop-down box and click Next.

5.A window will open, notifying you that Windows is searching for the Linksys LNE100TX Fast Ethernet Adapter driver. When the window notifies you that it is ready to install the driver, click Next.

5.Windows will begin installing the driver. At this point, the installation may require files from your Windows Millennium CD-ROM. If prompted, insert your Windows Millennium CD-ROM into your CD-ROM drive and enter

15 16