Manuals / Linksys / Computer Equipment / Network Router

Linksys RV016 manual Am not able to access the Router’s Web-based Utility Setup

Models: RV016

1 127
Download 127 pages 43.03 Kb
Page 97
Image 97

10/100 16-Port VPN Router

D.In the command prompt, type ping followed by your Internet IP address and press the Enter key. The Internet IP Address can be found in the web interface of the Router. For example, if your Internet IP address is 1.2.3.4, you would enter ping 1.2.3.4 and press the Enter key.

•If you get a reply, the computer is connected to the Router.

•If you do NOT get a reply, try the ping command from a different computer to verify that your original computer is not the cause of the problem.

E.In the command prompt, type ping www.linksys.com and press the Enter key.

•If you get a reply, the computer is connected to the Internet. If you cannot open a webpage, try the ping command from a different computer to verify that your original computer is not the cause of the problem.

•If you do NOT get a reply, there may be a problem with the connection. Try the ping command from a different computer to verify that your original computer is not the cause of the problem.

6.I am not getting an IP address on the Internet with my Internet connection.

A.Refer to “Problem #2, I want to test my Internet connection” to verify that you have connectivity.

B.If you need to register the MAC address of your Ethernet adapter with your ISP, please see “Appendix C: Finding the MAC Address and IP Address for Your Ethernet Adapter.” If you need to clone the MAC address of your Ethernet adapter onto the Router, see the MAC Address Clone section of “Chapter 6: Setting up and Configuring the Router” for details.

C.Make sure you are using the right Internet settings. Contact your ISP to see if your Internet connection type is DHCP, Static IP Address, or PPPoE (commonly used by DSL consumers). Please refer to the Setup section of “Chapter 6: Setting up and Configuring the Router” for details on Internet Connection Type settings.

D.Make sure you use the right cable. Check to see if the Internet LED is solidly lit.

E.Make sure the cable connecting from your cable or DSL modem is connected to the Router’s Internet port. Verify that the Status page of the Router’s Web-based Utility shows a valid IP address from your ISP.

F.Turn off the computer, Router, and cable/DSL modem. Wait 30 seconds, and then turn on the Router, cable/DSL modem, and computer. Check the Status tab of the Router’s Web-based Utility to see if you get an IP address.

7.I am not able to access the Router’s Web-based Utility Setup page.

A.Refer to “Problem #2, I want to test my Internet connection” to verify that your computer is properly connected to the Router.

B.Refer to “Appendix C: Finding the MAC Address and IP Address for Your Ethernet Adapter” to verify that your computer has an IP Address, Subnet Mask, Gateway, and DNS.

C.Set a static IP address on your system; refer to “Problem #1: I need to set a static IP address.”

D.Refer to “Problem #10: I need to remove the proxy settings or the dial-up pop-up window (for PPPoE users).”

Appendix A: Troubleshooting

86

Common Problems and Solutions

Page 96 Page 98
Page 97
Image 97
Linksys RV016 manual Am not able to access the Router’s Web-based Utility Setup
Page 96 Page 98

RV016 specifications

The Linksys RV016 is a robust VPN router designed for small to medium-sized businesses, providing secure and reliable network connectivity. This device offers versatile features, catering to the demands of advanced users while maintaining ease of use for those less experienced with networking technologies.

One of the standout characteristics of the Linksys RV016 is its ability to handle multiple WAN connections. It features dual WAN ports, which enable load balancing and failover support. This ensures that in the event one internet connection fails, the other takes over seamlessly, minimizing downtime and enhancing productivity. The RV016 is equipped with eight Ethernet ports, providing sufficient connectivity for various devices within an office environment.

Security is a paramount consideration in the design of the RV016. The device supports a robust VPN (Virtual Private Network) capability, allowing secure remote access for employees working from home or traveling. The router supports both IPSec and PPTP VPN protocols, ensuring versatile and secure communication channels. Additionally, it offers advanced firewall features, including stateful packet inspection (SPI) and denial-of-service (DoS) attack prevention, which safeguard the network from unauthorized access and external threats.

Linksys has also incorporated Quality of Service (QoS) features into the RV016, allowing users to prioritize their network traffic. This is particularly useful for businesses that rely on voice over IP (VoIP) services or have high bandwidth applications, ensuring that critical applications receive the necessary bandwidth for optimal performance.

The RV016 supports a variety of network management protocols, including DHCP, DNS, and static routing, making it easy to integrate into existing network infrastructures. Its web-based interface simplifies configuration and management, enabling IT staff to efficiently set up network parameters without the need for extensive training.

In summary, the Linksys RV016 stands out as a feature-rich VPN router that combines security, reliability, and ease of use. Its multiple WAN support, advanced security features, and network management capabilities make it an ideal choice for businesses seeking a dependable networking solution. Whether handling remote access or managing network performance, the RV016 provides the necessary tools to keep business operations running smoothly.