21
Chapter 6: Setting up and Configuring the Router
System Summary Tab
10/100 16-Port VPN Router
Block WAN Request. It shows the status (On/Off) of the Block WAN Request setting and hyperlinks to the General
page of the Firewall tab.
VPN Setting Status
VPN Summary. It hyperlinks to the Summary page of the VPN tab.
Tunnel(s) Used. It shows the number of VPN tunnels used.
Tunnel(s) Available. It shows the number of VPN tunnels available.
Current Connected (the Group Name of the GroupVPN) users. It shows the number of users. If GroupVPN is
disabled, the message, “No Group VPN was defined,” will be displayed.
Log Setting Status
It hyperlinks to the System Log page of the Log tab.
If you have not set up the e-mail server on the Log tab, the message, “E-mail cannot be sent because you have
not specified an outbound SMTP server address,” will be displayed.
If you have set up the mail server but the log has not been generated due to the Log Queue Length and Log Time
Threshold settings, the message, “E-mail settings have been configured,” will be displayed.
If you have set up the e-mail server and the log has been sent to the e-mail server, the message, “E-mail settings
have been configured and sent out normally,” will be displayed.
If you have set up the e-mail server and the log cannot be sent to the e-mail server, the message, “E-mail cannot
be sent out, probably use incorrect settings,” will be displayed.