Linksys WAP300N

How to connect a device using its Wi-Fi Protected Setup PIN

Use this method if your device has a Wi-Fi Protected Setup PIN (Personal Identification Number).

To connect a device using the device’s Wi-Fi Protected Setup PIN:

Wireless > Basic Wireless Settings

1.Log into the browser-based utility (see “How to open the browser-based utility” on page 8).

2.Click the Wireless tab, then click the Basic Wireless Settings page.

3.For Configuration View, select Wi-Fi Protected Setup™.

4.Enter the PIN from the device into the PIN field on the WAP300N’s Wi-Fi Protected Setup screen, then click Register.

The Wi-Fi Protected Setup status, wireless band, network name (SSID), and security mode are displayed at the bottom of the screen.

How to connect a device using the WAP300N’s Wi-Fi Protected Setup PIN

Use this method if your client device asks for the WAP300N’s PIN (Personal Identification Number).

To connect a device using the WAP300N’s Wi-Fi Protected Setup PIN:

Wireless > Basic Wireless Settings

1.Log into the browser-based utility (see “How to open the browser-based utility” on page 8).

2.Click the Wireless tab, then click the Basic Wireless Settings page.

3.For Configuration View, select Wi-Fi Protected Setup™.

Setting Up: Basics

4.On the client device, enter the PIN listed on the WAP300N’s Wi-Fi Protected Setup screen. It is also listed on the bottom of the WAP300N. In the example below, the WAP300N’s PIN is 32744781.

The Wi-Fi Protected Setup status, wireless band, network name (SSID), and security mode are displayed at the bottom of the screen.

How to manually set up your WAP300N

To manually set up your access point:

Wireless > Basic Wireless Settings

1.Log into the browser-based utility (see “How to open the browser-based utility” on page 8).

2.Click the Wireless tab, then click the Basic Wireless Settings page.

3.For Configuration View, select Manual.

10

Page 13
Image 13
Linksys How to manually set up your WAP300N, Wireless Basic Wireless Settings, To manually set up your access point