Linksys WAP300N How to use Wireless Range Extender mode, To select Wireless Range Extender mode

Linksys WAP300N

Depending on the security mode you select, you may be asked to enter additional information. Refer to the following table.

	Information
Security mode	Required	Description
WPA/WPA2		Enter the passphrase shared by this
	Passphrase	device and your wireless router (or
Personal
		access point).
		Select a level of WEP encryption, 40 /
	Encryption	64-bit (10 hex digits) or 104 / 128-bit
		(26 hex digits).
		Enter the WEP key of your network.
	Key 1	Key 1 is the transmit key used by this
		device.
WEP		The default is Auto, which allows
		either open system or shared
		key authentication to be used.
	Authentication	Select Open to use open system
		authentication (a WEP key is not used
		for authentication). Select Shared to
		use shared key authentication (a WEP
		key is used for authentication).

5. Click Save Settings.

Setting Up: Basics

How to use Wireless Range Extender mode

How to select Wireless Range Extender mode

To select Wireless Range Extender mode:

Setup > Operation Mode

1.Log into the browser-based utility (see “How to open the browser-based utility” on page 8).

2.Click the Setup tab, then click the Operation Mode page.

3.Select Wireless Range Extender, then click Save Settings.

15