Linksys WAP300N
- OR -
a.Log into the WAP300N’s
b.Click the Wireless tab, then click the Basic Wireless Settings page.
c.For Configuration View, select
d.Click the
How to connect to a router or access point using the WAP300N’s
Use this method if your router or access point asks for the WAP300N’s PIN (Personal Identification Number).
To connect a device using the WAP300N’s
Wireless > Basic Wireless Settings
1.Log into the
2.Click the Wireless tab, then click the Basic Wireless Settings page.
3.For Configuration View, select
4.On the router or access point’s
The
5.Click OK on the WAP300N’s
Setting Up: Basics
How to manually set up your WAP300N
You can follow these instructions to connect your WAP300N to your router, or you can use Wireless Network Site Survey to connect. For more information about site survey, see “How to run a wireless network site survey” on page 12.
To manually set up your WAP300N in wireless media connector mode:
Wireless > Basic Wireless Settings
1.Log into the
2.Click the Wireless tab, then click the Basic Wireless Settings page.
3.For Configuration View, select Manual.
4.Configure the following fields:
Network Name
Security
14
