Linksys WAP54GPE manual AP Mode, Administration, Status

Models: WAP54GPE

1 72
Download 72 pages 7.21 Kb
Page 22
Image 22

Wireless-G Exterior Access Point

AP Mode

Use this screen to configure the Access Point operation mode with WDS (Wireless Distribution System).

Administration

You will use the Administration tabs to manage the Access Point.

Management. This screen allows you to customize the password and Simple Network Management Protocol (SNMP) settings.

Log. Configure the Log settings for the Access Point on this screen.

Factory Default. Use this screen to reset the Access Point to its factory default settings.

Firmware Upgrade. Upgrade the Access Point’s firmware on this screen.

Reboot. Use this screen to reboot the Access Point.

Config Management. You can back up the configuration file for the Access Point, as well as save the backup configuration file to the Access Point.

Status

You will be able to view status information for your local network, wireless networks, and network performance.

Local Network. This screen displays system information, including software & hardware version, MAC address, and IP address on the LAN side of the Access Point.

Wireless. This screen will display current information on the Access Point and its wireless networks.

System Performance. This screen will display current information on the Access Point and its data transmissions.

Chapter 5: Setting Up the Wireless-G Exterior Access Point

snmp: the standard network management protocol on the Internet.

firmware: the software image that runs on a CPU inside a networking device.

16

Navigating the Utility

Page 22
Image 22
Linksys WAP54GPE manual AP Mode, Administration, Status