Wireless-G Exterior Access Point

Fragmentation Threshold. This specifies the maximum size a data packet can be before splitting and creating a new packet. It should remain at its default setting of 2346. A smaller setting means smaller packets, which creates more packets for each transmission. If you experience high packet error rates, you can decrease this value, but it will likely decrease overall network performance. Only minor modifications of this value are recommended.

Power Output. You can adjust the output power of the Access Point to get the appropriate coverage for your wireless network. Select the level you need for your environment. If you are not sure of which setting to choose, then keep the default setting, 100%.

Change these settings as described here and click Save Settings to apply your changes, or click Cancel

Changes to cancel your changes. Help information is displayed on the right-hand side of the screen, and click

More for additional details.

Chapter 6: Configuring the Wireless-G Exterior Access Point

28

The Wireless - Advanced Wireless Settings Tab

Page 34
Image 34
Linksys WAP54GPE manual Wireless-G Exterior Access Point