![](/images/new-backgrounds/1266900/26690073x1.webp)
Wireless-G Exterior Access Point
Wireless Bridge
This mode connects multiple physically separated wired networks with access points.
If you are trying to create a wireless connection between two wired networks, select Wireless Bridge and enter the MAC addresses of the remote wireless bridge/access point in the MAC 1 fields. If you do not know the remote wireless bridge/access point’s MAC address, click the Site Survey button. Select the wireless bridge/access point you want to use and click the Apply button. Then click the Close button to return to the AP Mode screen. If you do not see the wireless bridge/access point you want, click the Refresh button to run another site survey. The remote wireless bridge/access point also need to be set to Wireless Bridge mode.
If you are trying to create a wireless connection among multiple wired networks, select one Access Point as the hub for
Change these settings as described here and click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. Help information is displayed on the
IMPORTANT: In Wireless Bridge mode, the Access Point can ONLY be accessed by another access point in Wireless Bridge mode. In order for your other wireless devices to access the Access Point, you must reset it to Access Point mode. The two modes are mutually exclusive.
Chapter 6: Configuring the
Figure 6-18: Site Survey
31
The AP Mode Tab