Linksys WBP54G V2 manual Wireless-G Bridge Setup Screen

Models: WBP54G V2

1 52
Download 52 pages 30.66 Kb
Page 16
Image 16

Wireless-G Bridge for Phone Adapters

7.A list of all Bridges for Phone Adapters that can be detected by the Setup Wizard will be displayed. Select the Bridge you are installing and click Next. If the Bridge you want is not displayed, click the Refresh List button to search again.

8.This screen will display a list of wireless networks that can be detected and their status information: SSID (network name), MAC Address, Channel, Signal (strength), and Security (method). Select the wireless network you want.

If the network you want is not displayed, click the Refresh List button to search again.

To manually enter the SSID of the network you want, click the SSID radio button and complete the SSID field.

IMPORTANT: Some wireless access points or routers do not broadcast their status information. If you do not see the network you want, click the SSID radio button and manually enter its SSID.

Click Next to proceed, or click Back to return to the previous screen.

Chapter 4: Setting Up and Connecting the Wireless-G Bridge for Phone Adapters

Figure 4-7: Wireless-G Bridge Setup Screen

Figure 4-8: Choose a Wireless Network Screen

10

Running the Setup Wizard

Page 16
Image 16
Linksys WBP54G V2 manual Wireless-G Bridge Setup Screen