Linksys WBP54G V2 manual Disconnect the Ethernet network cable from the PC

Wireless-G Bridge for Phone Adapters

15.The Upgrade Utility will upgrade the Bridge’s firmware. A pop-up screen will appear when the upgrade is complete. Click the OK button.

IMPORTANT: Do not disconnect the power adapter from the Bridge while the firmware is being upgraded. Otherwise, damage may occur to the Bridge.

		Figure C-12: Upgrade
16.	Disconnect the Ethernet network cable from the PC.	Successful
	If the phone adapter or IP phone is in a different room, disconnect the power adapter from the electrical
	outlet. Move the power adapter and Bridge to the location of the phone adapter or IP phone.
17.	Connect the Ethernet network cable of the Bridge to the phone adapter or IP phone.
18.	Connect the power cable of the Bridge to the Power port of the phone adapter or IP phone.
	If necessary, plug the power adapter into an electrical outlet.

Appendix C: Upgrading Firmware 28